Advertisement
CLEANING AND MAINTENANCE
A
WARNING: Ensure that the
appliance is switched off and
disconnected from the power supply
before performing any maintenance
operation. To avoid risk of personal
injury use protective gloves (risk of
laceration) and safety shoes (risk of
contusion); be sure to handle by two
persons (reduce load); never use
steam cleaning equipment (risk of
electric shock).
Non-professional repairs not
authorized by the manufacturer
could result in a risk to health and
safety, for which the manufacturer
cannot be held liable. Any defect
or damage caused from non-
professional repairs or maintenance
will not be covered by the
guarantee, the terms of which are
outlined in the document delivered
with the unit.
A
Make sure that all lint traps
are cleaned before starting any
drying cycle.
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is 100%
recyclable and is marked with the
recycle symbol.
The various parts of the packaging
must therefore be disposed of
responsibly and in full compliance
with local authority regulations
governing waste disposal.
6
DISPOSAL OF HOUSEHOLD
APPLIANCES
This appliance is manufactured with
recyclable or reusable materials.
Dispose of it in accordance with
local waste disposal regulations. For
further information on the treatment,
recovery and recycling of household
electrical appliances, contact your
local authority, the collection service
for household waste or the store
where you purchased the appliance.
This appliance is marked in
compliance with European Directive
2012/19/EU, Waste Electrical
and Electronic Equipment (WEEE)
and with the Waste Electrical and
Electronic Equipment regulations
2013 (as amended). By ensuring
this product is disposed of correctly,
you will help prevent negative
consequences for the environment
and human health.
The symbol on the product
or on the accompanying
documentation indicates
that it should not be
treated as domestic waste
but must be taken to an appropriate
collection center for the recycling of
electrical and electronic equipme
nt.
Dryer / User Manual
Advertisement
Need help?
Do you have a question about the C HD C92 WWGD UK and is the answer not in the manual?
Questions and answers
how to reset hotpoint condencing tumble dryer that has no pin hole
The manual does not provide specific instructions on resetting the Hotpoint C HD C92 WWGD UK condensing tumble dryer without a pinhole. However, you can try the following general reset steps:
1. Turn Off the Dryer – Switch off the dryer using the control panel and unplug it from the power source.
2. Wait for a Few Minutes – Leave the dryer unplugged for at least 5-10 minutes to allow any residual power to discharge.
3. Plug It Back In – Reconnect the power supply and switch the dryer back on.
4. Check for Errors – If the dryer has an error code, consult the manual for troubleshooting steps.
5. Try Running a Program – Select a drying program and press the Start/Pause button to see if the issue is resolved.
If the problem persists, consider contacting Hotpoint customer support for further assistance.
This answer is automatically generated