INSTALLATION
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a sponge or cloth. Wash the shelf and bottle rack with a mild detergent solution.
Wipe completely dry before replacing the shelf and bottle rack. Clean the exterior of the
unit with a damp cloth, using mild detergent and warm water.
If you require more information refer to the Cleaning section.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with
the unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs
time to settle.
GB
Before Using Your Unit
Before placing any wine in the unit, turn it on and wait for 24 hours, to make sure it is
working properly and to allow it time to fall to the correct temperature. Your unit should not
be overfilled.
12
Need help?
Do you have a question about the DWC14B1C22E and is the answer not in the manual?
Questions and answers