INSTALLATION
Location
When selecting a position for your unit make sure the floor is flat and firm, and that the
room is well ventilated with an average room temperature of between 10°C and 38°C. Avoid
locating your unit near a heat source, e.g. a cooker, boiler or radiator. Avoid direct sunlight.
If you are placing your unit in an outbuilding such as a garage or annex ensure that the unit
is placed above the damp course, otherwise condensation will occur on the cabinet. Never
place the unit in a wall recess or into fitted cabinets or furniture. This refrigerating appliance
is not intended to be used as a built-in appliance.
Levelling the Unit
To do this adjust the levelling feet of the unit. If the unit is
not level, the doors and magnetic seal alignments will not be
covered properly.
Free Space Requirements
When installing the unit, ensure that 25 mm
of free space is left at both sides, 50 mm at
the rear of the unit and 25 mm at the top of
the unit. The door can open to the right or
the left, depending on which best suits the
location.
Please ensure there is more than twice the
width and depth distance space of the unit to
fully open the door to a maximum angle.
Do not cover or block the sides of
your wine cooler.
GB
Y mm
X mm
9
Need help?
Do you have a question about the DWC14B1C22E and is the answer not in the manual?
Questions and answers