Reversing The Door Swing - DeLonghi DWC14B1C22E Instruction Manual

INSTALLATION

Reversing the Door Swing

Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the
unit on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact
a qualified technician. You should only try to reverse the door yourself if you
believe that you are qualified to do so.
GB
1. Remove the upper right hinge cover,
screws and upper hinge. Remove the
upper left screw covers.
2. Lift the door and place it on a padded
surface to prevent it from scratching.
3. Remove the bottom screws and bottom
hinge. Remove the levelling feet from
both sides.
4. Re-fit the bottom hinge and bottom
screws to the other side. Replace both
levelling feet.
• Do not lay the unit flat as
this may damage the coolant
system.
• During door reversal, when
swapping the position of the
bottom hinge or adjusting the
levelling feet, tilt the unit. Do
not lay the unit flat.
10
1
2