Shark ION ROBOT RV720 Manual

SET UP YOUR CHARGING DOCK

Place charging dock on a level surface with its back against a wall, in a space without obstructions, that can easily be accessed by your Shark ION ROBOT. Plug dock into a power outlet.
NOTE: Placing your dock in a central location with wide view to your home will improve your robots ability to find home.

INSTALL THE SIDE BRUSHES

Flip the robot over and snap on the 2 side brushes included in the box.

POWER-UP SHARK ION ROBOT

Flip the Power switch located on the side of your Shark ION ROBOT to the ON position and place your robot on the dock.
When all 3 lights are solid blue, your robot is fully charged. Simply press Clean to send your robot into action.

PREP YOUR HOME FOR CLEANING

With Smart Sensor Technology, your robot cleans all areas of your floors and navigates through tight spaces. To help your robot complete its mission, prep your floor by removing all obstacles, such as loose power cords, clothes, toys, and low-hanging drapes.
Use the included BotBoundary™ Strips to easily block off obstacles or areas you don't want your robot to enter.
See the TIPS AND TRICKS FOR GREAT PERFORMANCE GUIDE for more information.

SET YOUR ROBOT'S CLEANING SCHEDULE

Use the included remote to set a recurring cleaning schedule for your robot. Simple instructions are located on the back of your remote and in your instruction manual.

For assistance, contact us at 800-798-7398 or visit us online at sharkclean.com
Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
Don't forget to register your robot at registeryourshark.com

@sharkcleaning