Braun BC10, BC10B Manual

Overview

Battery installation

1. Remove the battery door.
2. Insert 2x AA size new batteries as indicated in the battery compartment ( ) and press the RESET key ( ) to reset the clock. The display will turn on after a few seconds.
3. Close the battery door.

Only use new alkaline batteries from a reputable brand.

Setting the time

1. Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch ( ) to the TIME SETTING position.
2. Press the '+' or '-' key ( ) to set the desired value.
3. Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings.

Setting the alarm

1. Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch ( ) to the ALARM SETTING position.
2. Press the '+' or '-' key ( ) to set the desired value.
3. Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings.

Using the alarm function

1. Enable the alarm by pushing the ALARM ON / OFF slider ( ) up (so the green indicator is visible).
2. To disable the alarm and snooze function, push the ALARM ON / OFF slider down.

Using the snooze function

Tap the SNOOZE touch button ( ) to stop the alarm and activate the snooze function. When the snooze function is activated, the alarm will automatically start again after 5 minutes. The snooze function will not stop unless the ALARM ON / OFF SLIDER is pushed down

Braun helpline
Should you have a problem with your product, please check your local service centre at:
www.braun-clocks.com www.braun-watches.com