Download Print this page
Braun BC16 Quick Setup Manual
Hide thumbs Also See for BC16:

Advertisement

Available languages

Available languages

Quick Links

BC16
Alarm clock
Quick set-up guide
3
For detailed information refer to
the full user manual available at
www.braun-clocks.com/pages/warranty
or scan this code:
Braun helpline
Should you have a problem with your
product, please check your local service
centre at:
www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the
Procter & Gamble Company or its affiliates.
1
2
AM
4
5
alarm
time
brightness
DC 5.0V
3.0A
2A
6
Getting Started
1. Remove the battery door (
2. Take out button cell battery and remove the
plastic strip.
3. Replace the button cell battery.
4. Close the battery door.
5. Plug the power adapter into the DC jack at
the back of the clock (
Only use new alkaline batteries from a
reputable brand.
Setting the time
1. Slide the ALARM / TIME / BRIGHTNESS switch (
to the TIME position.
2. Press the '+' or '-' key (
Press and hold the '+' or '-' key to speed up the
AM
setting.
3. Slide the ALARM / TIME / BRIGHTNESS switch to
the BRIGHTNESS position to save the setting and
return to normal display.
Setting the alarm
1. Slide the ALARM / TIME / BRIGHTNESS switch (
to the ALARM position.
2. Press the '+' or '-' key (
Press and hold the '+' or '-' key to speed up the
setting.
3. Slide the ALARM / TIME / BRIGHTNESS switch to
the BRIGHTNESS position to save the setting and
return to normal display.
Using the alarm and snooze function
1. Enable the alarm by touching the ALARM ON / OFF
button (
up and the bell icon will appear on the LCD display.
reset
date
2. Touch the SNOOZE key (
activate the snooze function. When the alarm
sounds, the alarm icon will flash.
3. To disable the alarm and snooze function, touch
the ALARM ON / OFF button for ~ 2 seconds. The
green light will go out and the bell icon will disap-
1A
pear.
).
5
).
6
4
) to set the desired value.
3
4
) to set the desired value.
3
) for ~ 1 second. The green light will light
1
) to stop the alarm and
2
)
)

Advertisement

loading
Need help?

Need help?

Do you have a question about the BC16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Braun BC16

  • Page 1 1. Remove the battery door ( 2. Take out button cell battery and remove the plastic strip. 3. Replace the button cell battery. BC16 4. Close the battery door. 5. Plug the power adapter into the DC jack at Alarm clock...
  • Page 2 1. Entfernen Sie die Batterieabdeckung ( 2. Entnehmen Sie die Knopfzelle und entfernen Sie den Plastikstreifen. 3. Setzen Sie die Knopfzelle wieder ein. BC16 4. Schließen Sie das Batteriefach. 5. Stecken Sie den Netzadapter in die DC-Buchse auf Wecker der Rückseite der Uhr ein ( Verwenden Sie nur neue Alkali-Batterien von anerkannten Marken.