BRAUN BNC008 - Travel Alarm Clock Manual

Table of Contents

Contents

1 Battery precautions
2 Getting started
3 Function keys
4 Product description
5 Display symbols
6 Setting the time
7 Setting the alarm
8 Using the alarm and snooze function
9 Battery replacement
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Battery precautions

Do not use rechargeable batteries.
Use only alkaline AAA batteries of the same or equivalent type.
Insert batteries with the correct polarity.
Keep batteries away from children.
Dispose of exhausted batteries according to local legal requirements. Do not dispose them by throwing away with normal household rubbish.
Avoid short circuiting the contacts in the battery compartment and battery terminals.
Remove batteries from the unit if it will be not used for long period of time.
Exhausted batteries should be removed from the battery compartment to prevent over-discharge, which can cause leakage and may cause damage to the clock.

Getting started

Remove the battery door.
Insert 1xAAA size new battery as indicated in the battery compartment, and press the "reset" key to reset the clock.
Close the battery door.

Function keys

TIME /OFF/ALARM switch

Slide to the TIME position to set the clock time.
Slide to the ALARM position to set the alarm time.
Slide to the OFF position to exit the setting mode and return to normal display.

+ key

In normal display, press to switch between 12/24 hour format. In setting mode press to increase the setting value. Press and hold to speed up the setting.

- key

In setting mode press to decrease the setting value. Press and hold to speed up the setting.

ALARM ON/OFF button

Press to turn the alarm on/off.

SNOOZE/LIGHT button

Press to turn on the backlight for 5 seconds.
Press to stop the alarm and activate the snooze function.

RESET key

Press by using a pin to reset all values to default. In case of a malfunction, the unit has to be reset.

Product description

(Image 1)
Product description

LCD display
ALARM ON/OFF button
SNOOZE/LIGHT button
TIME /OFF/ALARM switch
+ key
- key
RESET key
Battery compartment

Display symbols

(Image 2)
Display symbols

Time
AM/PM
Alarm time
Alarm icon

Setting the time

Slide the "TIME/OFF/ALARM" switch to the TIME position.
Press the "+" or "-" key to set the desired value. Press and hold the "+" or "-" key to speed up the setting.
Slide the "TIME /OFF/ALARM " switch to the OFF position to return to normal display and save the settings.

Setting the alarm

Slide the "TIME/OFF/ALARM " switch to the ALARM position.
Press the "+" or "-" key to set the desired value. Press and hold the "+" or "-" key to speed up the setting.
Slide the "TIME /OFF/ALARM " switch to the OFF position to return to normal display and save the settings.

Using the alarm and snooze function

Active the alarm by pressing the "ALARM ON/ OFF" button The bell icon "" will appear on the LCD display.
Press the SNOOZE/LIGHT button to stop the alarm and activate the snooze function. When the alarm sounds, the alarm icon will flash.
To de-activate the alarm and snooze function, press the ALARM ON/OFF button. The bell icon will disappear.

Note: When the snooze function is activated, the alarm will automatically start again after 5 minutes. The snooze function will not stop unless you press the ALARM ON/OFF button to turn off the snooze.

Battery replacement

When the LCD becomes dim, replace with a new battery at once.

Guarantee
2 year guarantee against material and workmanship defects (except battery). The guarantee is valid in those countries where the alarm clock is officially being sold.
Broken or cracked lens screen are not covered under the Guarantee.

Braun helpline
Should you have a problem with your product, please check your local service centre at:
www.braun-clocks.com
www.braun-watches.com
or contact +44 208 208 1833

This product is covered by the Waste Electrical and Electronic Equipment (WEEE) directive. It should not be discarded with normal household waste but taken to your local collection centre for recycling.