Use only alkaline AA batteries of the same or equivalent type.
Insert batteries with the correct polarity.
Keep batteries away from children.
Dispose of exhausted batteries according to local legal requirements. Do not dispose them by throwing away with normal household rubbish.
Avoid short circuiting the contacts in the battery compartment and battery terminals.
Remove batteries from the unit if it will be not used for long period of time.
Exhausted batteries should be removed from the battery compartment to prevent over-discharge, which can cause leakage and may cause damage to the clock.
Getting started
Remove the battery door.
Insert 1xAA size new battery as indicated in the battery compartment, and press the "reset" key to reset the clock.
Close the battery door.
Product description
LCD display
SNOOZE/LIGHT button
ALARM ON/OFF button
TIME /OFF/ALARM switch
+ key
- key
Battery compartment
RESET key
Display symbols
Time
AM/PM
Alarm time
Alarm icon
Function keys
TIME /OFF/ALARM switch
Slide to the TIME position to set the clock time.
Slide to the ALARM position to set the alarm time.
Slide to the OFF position to exit the setting mode and return to normal display.
+ key
In normal display, press to switch between 12/24 hour format. In setting mode press to increase the setting value. Press and hold to speed up the setting.
- key
In setting mode press to decrease the setting value. Press and hold to speed up the setting.
ALARM ON/OFF button
Press to turn the alarm on/off.
SNOOZE/LIGHT button
Press to turn on the backlight for 10 seconds.
Press to stop the alarm and activate the snooze function.
RESET key
Press by using a pin to reset all values to default. In case of a malfunction, the unit has to be reset.
Setting the time
Slide the "TIME/OFF/ALARM" switch to the TIME position.
Press the "+" or "-" key to set the desired value.
Slide the "TIME /OFF/ALARM " switch to the OFF position to return to normal display and save the settings.
Setting the alarm
Slide the "TIME/OFF/ALARM " switch to the ALARM position.
Press the "+" or "-" key to set the desired value.
Slide the "TIME /OFF/ALARM " switch to the OFF position to return to normal display and save the settings.
Using the alarm and snooze function
Activate the alarm by pressing the "ALARM ON/OFF" button. The bell icon " " will appear on the LCD display.
Press the SNOOZE/LIGHT button to stop the alarm and activate the snooze function. When the alarm sounds, the alarm icon will flash.
To de-activate the alarm and snooze function, press the ALARM ON/OFF button. The bell icon will disappear.
Note When the snooze function is activated, the alarm will automatically start again after 5 minutes. The snooze function will not stop unless you press the ALARM ON/OFF button to turn off the snooze.
Battery replacement
When the LCD becomes dim, replace with a new battery at once.
Note Exposure to an electrostatic environment may cause the clock to reset. In this event please follow the instructions as described in this manual to set the clock again.
Guarantee
2 year guarantee against material and workmanship defects (except battery). The guarantee is valid in those countries where the alarm clock is officially being sold.
Broken or cracked lens screen are not covered under the Guarantee.
Braun helpline Should you have a problem with your product, please check your local service centre at: www.braun-clocks.com www.braun-watches.com or contact +44 208 208 1833
This product is covered by the Waste Electrical and Electronic Equipment (WEEE) directive. It should not be discarded with normal household waste but taken to your local collection centre for recycling.
Braun is a registered trademark of Braun GmbH, Kronberg, Germany used under license by Zeon Ltd
Need help?
Do you have a question about the BNC009 and is the answer not in the manual?
Questions and answers