Braun BC12 - Alarm Clocks Manual

Battery installation

1. Insert 1xAA (1.5V) battery observing the correct polarity, as shown on the diagram.
2. Replace battery cover.

Only use new alkaline batteries from a reputable brand.

Time setting

Turn the time set knob ( )on the back of the clock in the direction of the arrow until the correct time is shown.

Alarm setting

Turn the alarm set knob () on the back of the clock in the direction of the arrow until the desired alarm time is shown.

Alarm function

To set the alarm, push the button at the top of the clock so that the green alarm bar is showing. To unset the alarm, push the button at the top of the clock so that the green alarm bar is not showing.

Snooze function

When the alarm is sounding, press down on the main body of the clock and the SNOOZE/LIGHT button at the base will be activated. The alarm will be stopped and will sound again in ~5 minutes.

Light function

Anytime, press down on the main body of the clock and the integrated foot SNOOZE/LIGHT button at the base will be activated. The dial will be illuminated for ~5 seconds.

For detailed information refer to the full user manual available at www.braun-clocks.com/pages/warranty or scan this code:

Braun helpline
Should you have a problem with your product, please check your local service centre at:
www.braun-clocks.com
www.braun-watches.com