SATO M-8485Se Operator And Technical Reference Manual page 96

Section 5. Programming Reference
Special Notes
Horizontal
Expanded
Page 5-32
1. Use the Print Position commands (V and H) to locate the new
area for the duplicate image.
2. Position of the new target area must not be inside the original
image.
3. If you use the Rotate command, V, H, X and Y axis will be
reversed.
4. If the reference area of the target image exceeds the print area, it
will not be printed.
5. The allowable ranges for these fields are as follows:
M-8459Se
0001
aaaa to
cccc 0896
Default
Vertical 0001
bbbb to
dddd 1424
Vertical 0001
bbbb to
dddd 9999
PN 9001073 Rev C
M-8460Se M-8485Se
0001 0001
to to
1216 1024
0001 0001
to to
1424 1424
0001 0001
to to
9999 9999
SATO "Se" Print Engines
M-8490Se
0001
to
1344
0001
to
2136
0001
to
9999