Switches And Sensors - SATO M-8400RV Operator And Technical Reference Manual

SWITCHES AND SENSORS

Ribbon End Sensor:
Head Open Switch:
Label Sensor Unit:
SATO M-8400RV
Section 2. Installation and Configuration
This sensor is a motion detector that signals the printer
when the ribbon supply is turning.
When the print head is opened, this switch is activated
and the printer will stop printing.
This sensor unit contains two types of sensors, one for
label gap and one for Eye-Mark sensing. The sensors
are adjustable over a limited range.
9001041 Rev. D Page 2-13