Slot Select - SATO M-8400RV Operator And Technical Reference Manual

Memory Card Function
Command Structure
Command Function
Printer Input
Printer Output
Special Notes
SATO M-8400RV

Slot Select

<ESC>CCa
a = Memory Card Slot
1 Slot 1
2 Slot 2
Example: <ESC>CC1
Placement: Immediately following the <ESC>A Start Code.
Default: Last selected Memory Card Slot.
Selects the card slot to be used for following Memory Card
commands.
<ESC>A
<ESC>CC1
{commands}
<ESC>Z
There is no printer output as a result of this command.
1. This command requires the Memory Card option. See your SATO
representative for more information.
9001041 Rev. D
Section 4. Programming Reference
Page 4-95