Off-Line/Pause - SATO M-8400RV Operator And Technical Reference Manual

Section 4. Programming Reference
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 4-54

Off-Line/Pause

<ESC>@,nn...n
nn...n = Optional message to be displayed on the LCD.
Maximum of 32 characters
Example: See above
Placement: Anywhere in the print job between <ESC>A and <ESC>Z
Default: None
To specify the printer to come to an off-line state. When used within a
print job, the printer goes off-line after finishing the print job.
<ESC>A
<ESC>@,Load Blue Labels and place printer On-Line
. . . Job . . .
<ESC>Z
There is no printer output for this command. The printer is placed in
the Off-Line mode as soon as the current print job is finished.
1. You must press the LINE key on the front panel to return the printer
to an On-Line status (see Operator Panel in Section 2 of this
manual).
2. Remember, when using this command, that if the print job specifies
<ESC>Q10, all ten labels will print before the printer will go
off-line.
9001041 Rev. D SATO M-8400RV