Operation; Selecting Video Memory; Selecting An Aspect Ratio; Adjusting The Picture - Runco RS-1100 CineWide User Manual

• Press the CUST1 or CUST2 button on the
remote control to recall settings for the current
input from the "Custom 1" or "Custom 2"
memory preset.
• Press ISF NIGHT to recall settings for the current input from the "ISF Night" memory
preset.
• Press ISF DAY to recall settings for the current input from the "ISF Day" memory
preset.
Use these buttons to select the appropriate
aspect ratio for the type of program material being
viewed. For more information on aspect ratios,
refer to Table 4-1.
• Press the BRT button on the remote control to
adjust the image brightness.
• Press CONT to adjust the image contrast.
• Press COL to adjust the image color level.
• Press TINT to adjust the hue of the image.
For more information about these controls, refer to Picture Adjust on page 52.
When you turn on the RS-900/RS1100, it
switches to the last selected input and looks for a
valid signal.
Use these buttons on the remote control to select
an input source directly.
RS-900 and RS1100 Series Installation/Operation Manual
ISF ISF
CUST1 CUST2
NIGHT DAY
VWIDE
LBOX
16 : 9 4 : 3
1 2
CINEMA VCINE
BRT CONT COL TINT
VID S-VID COMP1 COMP2
RGB HDMI HDMI 2
INFO RVR
49

4. Operation

4.1
Selecting Video
Memory
4.2
Selecting an Aspect
Ratio
4.3

Adjusting the Picture

4.4
Selecting An Input
Source