Primary Lens Adjustments; Focus And Zoom - Rs-900/Rs1100; Focus And Zoom - Rs1100 Ultra; Lens Shift - Runco RS-1100 CineWide User Manual

Installation
3.8
Primary Lens
Adjustments
Focus and Zoom –
RS-900/RS1100
Focus and Zoom –
RS1100 Ultra

Lens Shift

3.9
Changing the OSD
Language
The RS-900/RS1100 gives you a great deal of control over the picture size, position and
focus.
➤
To focus the projected image, grasp the lens by the outer
ring and rotate it.
To make the picture smaller (zoom out) or larger (zoom in),
move the zoom tab in the appropriate direction.
➤
The RS1100 Ultra has motorized focus and zoom
controls. To access them, use the two, white
buttons on the remote control to the left of the
LENS button.
To focus the projected image, press the FOCUS
button, then use the left- and right-arrow buttons
( , ) to adjust the focus.
To make the picture smaller (zoom out), press the ZOOM button, then use the left-arrow
( ) button. To enlarge the picture (zoom in), press the ZOOM button, then use the
right-arrow ( ) button.
➤
Vertical Lens Shift: To shift the projected image vertically, press the LENS button, then
use the up and/or down-arrow (
Horizontal Lens Shift (RS1100 Ultra Only): To shift the projected image horizontally,
press the LENS button, then use the left and/or right-arrow (
The RS-900/RS1100 OSD language is initially set to English, but can also display the
menus in French, Spanish, Italian or German. To change the OSD language:
1. Press MENU.
2. Select Installation from the Main Menu and press ENTER.
3. Select Language from the Installation Menu.
4. Press or
, ) buttons.
to select the desired language. (The change takes effect immediately.)
38 RS-900 and RS1100 Series Installation/Operation Manual
Zoom
in
Zoom
out
Focus
(FOCUS) (ZOOM)
LENS
FOCUS ZOOM LENS
, ) buttons.