Thank you for purchasing this Snow Peak Product. This product is a tarp designed for camping. In order to ensure your safety when using this product, please read these instructions carefully before use. Please be sure to keep this document for future reference. If you find anything in the instruction manual that is difficult to understand, or if you find any product defects, stop using it immediately and contact the dealer where you purchased the product, or Snow Peak Customer Service.
Practice assembling and handling the product in a safe location before using it while camping. In the unlikely event that there is a problem with the product or missing accessory items, please contact the dealer where you purchased the product, or Snow Peak Customer Service. ●This product does not include poles, pegs, or hammers.
Page 4
Rope with rope tensioner, peg down position Forked end rope (22.9') Sub pole 140 cm (4.6') (for basic style) Forked Forked Top view end rope end rope 10 m 10 m (32.8') (32.8') Main pole 7 m (22.9') forked end rope 210 cm (6.9') Forked end rope...
Set-up Procedure: Make sure that two or more people take part in the set-up for safery. Please practice Tarp setup and disassembly repeatedly according to the following explanation to prepare for use when camping. Make sure that you have all the accessories in advance. Inappropriate setup or disassembly may damage the tarp or poles, or lead to an accident.
Page 6
Erect the two main poles vertically, Fig. C Top view pull and spread the main ropes outwards along the ridgeline of the roof, then insert the pegs at positions that are approximately 45° to the left and right of the Ridgeline center of the main poles.
Page 7
After hooking the rope, place the pole top cover Fig. H and secure it using Velcro tape so that it covers the tip of the pole. [Fig. H] Erect the two sub poles vertically, pull and spread the Fig. I Sub rope sub ropes, then insert the pegs at positions that are approximately 45°...
Page 8
Peg down other peg down rubber loops in Fig. M numerical order. [Fig. M] When doing so, make sure that panels do not wrinkle. Peg down rubber loops ③, ④, ⑦, ⑧, ⑨, and ⑫ have a double loop structure. When not using a panel as a door panel, peg down the double loops at the same time.
Page 9
How to make an entrance You can create up to six basic entrances. [Fig. Q] Remove the peg down loop at the bottom of the entrance panel zipper and open the outer pull zipper that is attached to the entrance panel from the outside. Fig.
Page 10
How to attach the separately sold Penta Ease (SDI-001/SDI-001-IV-US) Connect the tape with the buckle (♂) at the top of Penta Ease to the roof tape (gray) attached to the main pole in step ② during the setup. [Fig. A] Lay out Penta Ease so that it comes on the side of Land Station, and while centering it on the main pole, hook the peg loops A' to C' on the back of Penta Ease to Land Station pegs A to C, and adjust the buckle to apply appropriate tension.
Page 11
Setup style arrangement <Basics> You can use the basic set (sold separately, pole 210 cm (6.9') x 2, 140 cm (4.6') x 2) that can be closed all the way to create a setup style with a sense of openness. Insert the sub pole into the grommet at the bottom center of the center panel, and apply tension using the forked end rope.
Page 12
<Advanced> You can enjoy various setup styles by extending the 140 cm (4.6') sub pole of the basic set or increasing the number of sub poles. Here is an example. Insert the sub pole into the corner grommet with the side zipper open and apply tension with the rope.
Page 13
Precautions for disassembly and storage ●Make sure that the product is sufficiently dry before storing it. ●If the wind is strong, wait for it to subside before disassembling the Tarp. ●If you have attached Penta Ease or Inner Room, or if you have combined another tent or tarp, be sure to remove the Inner Room or the combined products from the main body before disassembling.
Page 14
●When using the product again after not using it for a long period of time, inspect the product and its included items. If you have any questions, please contact Snow Peak Customer Service. ●A polyester fabric blend is used for this product. Considering the material characteristics, we have adopted processing and color patterns that will result in less color migration.
Snow Peak Customer Service. If there are apparent defects in the product's manufacturing, the defective product will be repaired or exchanged free of charge. In other cases, Snow Peak will repair the product for an appropriate fee. The decision to repair or replace the product will be at our discretion.
11" × 12.6") 730 (24') ○Weight : 6.7 kg (14.8 lbz) ○Capacity : 4-6 persons If you have any questions or concerns, please contact your retailer or Snow Peak customer service. Snow Peak +1(503)461-0781 ( 9:00-17:00 ) Customer Service Email: info@snowpeak.com Snow Peak USA, Inc.
Need help?
Do you have a question about the Land Station Medium Pro.Air and is the answer not in the manual?
Questions and answers