Cassida 6600 - Money Counter Manual
- Quick start manual (3 pages) ,
- Cleaning procedure (3 pages)
Advertisement
Bill Loading Procedure
To avoid jamming, miscount and other errors such as CHAIN NOTE error, it's critical to use the proper bill loading technique. We recommend that the user follow the steps below to properly load the Cassida 6600.
STEPS
Adjust the bill guides to a size slightly wider (0.10" on each side) than the width of the bills in the stack.
- Correct or remove the bills if they are wet, excessively dirty, spoiled, damaged, folded or severely wrinkled. Otherwise, they can cause jamming and miscounts.
![]()
- Square the bill stack as shown:
![]()
- Place the bill stack flat on the hopper as shown.
![]()
If, after using the recommended bill loading technique, CHAIN NOTE error or jamming are still encountered. Please follow the Feed Gap Adjustment Procedure or contact Cassida After Market Technical Services.
NOTE: Several factors can cause a Cassida 6600 to jam or not recognize genuine bills:
- Overly wrinkled, overly creased, overly worn, and vandalized bills
- Foreign objects dropped or run through the bill path
- Dropping the unit or bumping into the unit during use A harsh change in temperature
- Extended period of non-use
- Improper maintenance or lack of preventative maintenance/cleaning
CONTACT INFORMATION
Cassida Corporation
After Market Technical Services
Support: http://www.cassidausa.com/support
E-Mail: support@cassidausa.com
Cassida Corporation
11035 Technology Place, Suite 500 San Diego, CA 92127
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the 6600 and is the answer not in the manual?
Questions and answers