MUNBYN IMP002 - Thermal Printer Manual

Overview

This document describes the Windows setup instructions and the configuration for the IMP002.

Please read this manual before using the printer.

Scan the QR code for WhatsApp online chat

Contact us
MUNBYN provides 18 months warranty and lifetime free service.

If you encounter any issues with the product, please contact the MUNBYN team to promptly receive troubleshooting tips or a replacement.

Email: support@munbyn.com (24-7 online support)

Website: https://support.munbyn.com (how-to videos, warranty details)

Skype: +16502062250

WhatsApp: +8618144898200

Windows System

Installation

1. Get the Windows driver from the link:http://u.pc.cd/ODz
2. Only supports USB connection.
3. If your system is updated, please uninstall the driver before installing it. Please refer to following section for detailed driver uninstallation.

Install Printer via USB

1. Use the USB cable to connect the printer and computer and turn on the printer and computer.
2. Run the "Simple80DriveSetup.exe" installer.
   
   Figure 2- 1 Run as Administrator
3. Select [USB], displayed in the white box on the right of the USB port, and click [installing the printer driver].
   
   Figure 2- 2 USB Install Interface
4. The interface pops up a prompt that the installation is successful. Click [OK], and the printer automatically prints a test page.
   
   Figure 2- 3 Successful Installation

Uninstallation

Delete Print Pool Job

1. Enter [Settings] → [Devices] → [Printers & scanners] interface, click [XP-58] and choose [Open queue].
   
   Figure 2- 4 Control Panel
2. Check the printer for print jobs. right-click in the print pool and click the [Cancel all Documents] to delete jobs.
   
   Figure 2- 5 Cancel All Documents

Delete Printer

1. Click [XP-58] and choose [Remove device].
   
   Figure 2- 6 Remove Device

Windows Printer Settings

1. Click [XP-58] and choose [Manage].
   
   Figure 2- 7 Manage
2. Click [Printer properties], enter the XP-58 Properties interface.
   
   Figure 2- 8 Device Settings
3. Click [Device Setting], enter the Device Setting interface.
   
   Figure 2- 9 Device Settings

Paper Feed After

Create more blanks at the bottom of the receipt.

Figure 2- 10 Feed Paper Setting

Logo ID

Set the logo, and the printer will automatically print the logo on the receipt.

1. please refer to the steps in NV Logo Demo section to add the logo.
2. Set logo ID.
   1. Doc-top logo ID: Set the number of logos at the top of the printed receipt.
   2. Doc-top logo Mode: Set the size of the logo printed at the top of the receipt.
   3. Doc-bottom logo ID: Set the number of logos at the bottom of the printed receipt.
   4. Doc-bottom logo Mode: Set the size of the logo printed at the bottom of the receipt.
      
      Figure 2- 11 Logo ID

Setting Tool

Driver downloads link: http://u.pc.cd/DaYotalK

Tool setting files only support Windows systems.

1. Unzip the file and click <POS Printer Test.exe>.
   
   Figure 2- 12 Printer Test V3.7C

Main Interface

Figure 2- 13 Main Interface

Communication Port Selection
Select USB port.

Printer Type Selection
Printer type: default to POS-58.

Print
Print the information and data in the "content" edit box.

Print Self-Test Page
Click on this button, and the printer will print a self-test page.

Restore Factory
Click on this button, and the printer will restore factory settings.

Advanced
Click "advanced" button, and set up more features to have print test, below is the detailed introduction.

English
It's for switching software interfaces between English and Chinese.

Advanced Function

Click the "advanced" button on the main interface, the following interface will pop up:

Figure 2- 14 Advanced Interface

NV Logo Demo
Click the "NV download" button, the menu below will pop-up:

Figure 2- 15 NV Logo Demo

1. Size requirement and function selection of paper cutting of NV LOGO printing.
2. Open LOGO:
   Click and select BMP format picture or the LOGO file that you want to print.
3. Download NV LOGO:
   Click the download button after opening the BMP format file and the file will be downloaded to the printer. Print the file content by clicking "print LOGO" button.
4. Print LOGO:
   Click this button to complete the LOGO image printing.
5. Clear LOGO:
   Remove the downloaded NV LOGO.
6. Mult NV LOGO down.
7. Show current NV LOGO.

Bluetooth Setting
This function is no suitable for this machine.

Figure 2- 16 Bluetooth Setting

1. Set up the Port name of the Bluetooth Printer. (The Factory Default BT NAME is "Printer001")
2. Set up the Password of the Bluetooth Printer. (The Factory Default BTPINKEY is "123456")
3. After finishing the above settings, click "Setting", and then finished the settings of Bluetooth printer Parameters.

Language Setting
Function not developed.

Program upgrade
If there is a new firmware program available, you can upgrade it by pressing this button.

MacOS System

Installation and Uninstallation

Driver downloads link: http://u.pc.cd/oqkctalK
Only supports USB connection.

Driver Installation

1. Turn on the printer and computer.
2. Double-click the "prt.pos.drv_3.13.8.pkg" installation package.
   
   Figure 3- 1 Driver Installation Package

Install Printer via USB Connection

1. Plug in the printer, connect the printer to your computer via USB, place the thermal paper into the printer and then power on the printer.
   
   Figure 3- 5 Connect USB
2. After the driver is installed, in the Mac menu bar, open the [System Preferences] and click the [Printers & Scanners] icon, the printer has been automatically generated in Printers & Scanners interface.

Note: If the printer is not generated automatically, please reset the USB cable on the computer.

Figure 3- 6 Printers & Scanners

Figure 3- 7 Printers & Scanners

Uninstalling Driver

1. In the Mac menu bar, open the [System Preferences] and click the [Printers & Scanners].
   .
   Figure 3- 8 System Preferences
2. Delete the entire POS-58 printer queue from the printers list.
   Figure 3- 9 Printers & Scanners

Printer Features Settings

Print Density

You can set the print density to a level between 1 and 8.

Figure 3- 10 Print Density

Logo Control

Set the logo, and the printer will automatically print the logo on the receipt.

1. Add the logo to printer, please refer to NV Logo Demo section.
2. Set logo id.
   1. Doc-top logo ID: Set the number of logos at the top of the printed receipt.
   2. Doc-top logo Mode: Set the size of the logo printed at the top of the receipt.
   3. Doc-bottom logo ID: Set the number of logos at the bottom of the printed receipt.
   4. Doc-bottom logo Mode: Set the size of the logo printed at the bottom of the receipt.
      
      Figure 3- 11 Logo Control

Ubuntu System

Installation and Uninstallation

Driver downloads link: http://u.pc.cd/cwnctalK
Only supports USB connection.

Driver Installation

1. Open the folder where the driver is located, press the right mouse button, and select [Open in Terminal] to open the terminal.
   
   Figure 4- 1 Open in Terminal
   
   Figure 4- 2 Terminal
2. Enter [ls], and you can see that there is a driver file.
   
   Figure 4- 3 Check Driver File
3. Enter [sudo chmod +x printer-driver-pos_3.13.8_all.deb] and click [Enter] Key on your keyboard, then enter your root password.
   Note: Use the "sudo" command to enable root account privileges.
   
   Figure 4- 4 Installation
4. Enter [sudo dpkg -i file path] and click [Enter] Key on your keyboard. Enter your root password. The display content of the terminal is shown in the figure below, indicating that the driver installation is successful.
   Note: If you do not have a root password, please open the terminal, and enter [sudo password root] to set the root password.
   
   Figure 4- 5 Installation Successful

Install Printer via USB Connection

Before installation, you need to connect the printer to your PC, and then power on the printer.

1. Open your favorite web browser and navigate to "http://localhost: 631/admin". Select [Administration], click the [Add Printer].
   
   Figure 4- 6 Add Printer
2. Enter your [Username] and [Password].
   
   Figure 4- 7 Sign In
3. Select [Printer POS-58(Printer POS-58)], click the [Continue].
   
   Figure 4- 8 Add Printer
4. Click the [Continue].
   
   Figure 4- 9 Add Printer Name
5. Choose [POS] and click the [Continue].
   
   Figure 4- 10 Select POS
6. Choose [POS-58] and click the [Add Printer].
   
   Figure 4- 11 POS Label-80
7. Click [Set Printer Options] and [Set Default Options]. This completes printer installation and registration.
   
   Figure 4- 12 Set Printer Options
   
   Figure 4- 13 Set Default Printer

Uninstalling Driver

1. Open your favorite web browser and navigate to [http://localhost: 631/printers]. Click the printer you want to delete, enter printer interface.
   
   Figure 4- 14 Driver Web Page
2. Click [Administration], select the [Delete Printer].
   
   Figure 4- 15 Administration
   
   Figure 4- 16 Delete Printer
3. Click the [Delete Printer]. Printer has been deleted successfully.
   
   Figure 4- 17 Printer Web Page
   
   Figure 4- 18 Successful Installation

Printer Settings

1. Open your favorite web browser and navigate to [http://localhost: 631/printers]. Click the printer you want to delete, enter printer interface.
   
   Figure 4- 19 Driver Web Page
2. Click [Administration], select the [Set Default Option], enter Set Printer Options interface.
   
   Figure 4- 20 Set Default Options
   
   Figure 4- 21 Set Default Options

Print Density

You can set the print density to a level between 1 and 8.

Figure 4- 22 Print Density

Logo ID

Set the logo, and the printer will automatically print the logo on the receipt.

1. Please refer to the steps in NV Logo Demo section to add the logo.
2. Set logo id.
   1. Doc-top logo ID: Set the number of logos at the top of the printed receipt.
   2. Doc-top logo Mode: Set the size of the logo printed at the top of the receipt.
   3. Doc-bottom logo ID: Set the number of logos at the bottom of the printed receipt.
   4. Doc-bottom logo Mode: Set the size of the logo printed at the bottom of the receipt.

Figure 4- 23 Logo ID

ChromeOS System

Driver downloads link: http://u.pc.cd/3kVctalK Only supports USB connection.

Installation

1. Search [POS Printer manager] on Google Store and click [Add to Chrome].
   
   Figure 5- 1 Add Extensions
2. Click [Add extension]. At this time, you can see the installed [POS Printer manager] extension program on the page.
   
   Figure 5- 2 Add Extension
   
   Figure 5- 3 Successful Installation

Uninstallation

1. Open the extension page, click [Remove] below the plug-in, and click [Remove] again in the pop-up window at the top right of the page to delete the driver.
   
   Figure 5- 4 Remove Driver
   
   Figure 5- 5 Remove Driver

Connect Printer

1. Click the extension icon in the upper right corner of the Chrome browser, select the installed printing plug-in, and jump to the [POS Printer manager] page.
   
   Figure 5- 6 Open Extension Icon
2. Click [USB], connect the receipt printer to Chromebook via USB, click [Connect], and a window of matching printer devices will pop up.
   
   Figure 5- 7 Click USB
3. Select the printer that needs to be matched, and then click [Connect] to connect. If the connection is successful, there will be the words "paired device" in the middle of the page.
   
   Figure 5- 8 Connect Printer
   
   Figure 5- 9 Connection Successful

Printer Parameter Configuration

Click [Setting] on the printer management page, click the [Command Type] drop-down box, and select [ESC/POS].

1. Print density: Set the print density to a level between 1 and 8.
2. Halftone: Disable、Error Diffusion
3. Cut Paper: Different paper cutting methods can be set.
4. Open Cash Drawer: Set the cash drawer opening method.
5. Paper Saving: Set different paper saving methods.
6. Custom Paper Size: The "CUSTOM" option in the paper size during printing refers to the dimensions set for a custom paper size.
   
   Figure 5- 10 Setting Page

Print Content

Click print on the page that needs to be printed to jump to the print preview page. You need to confirm the following three points before proceeding with the print job.

1. Select the printer (select[POS Printer]).
2. Select the paper size[CUSTOM] ([CUSTOM] is the [Custom Paper Size] set in the [Setting] page of the printer management page).
3. Print density (select 203 dpi in the print density drop-down box).
   
   Figure 5- 11 Print Content

Android System

How to Connect a Bluetooth Printer

1. Put the thermal paper into the printer and press the printer power button to turn on the printer.
2. Turn on the Bluetooth on your phone. Search Bluetooth device [P502A-1328] and connect it.
   
   Figure 6- 1 Select Bluetooth
3. Ethe pairing code [0000] and click [OK]. Then the mobile phone is successfully connected to the printer via Bluetooth.
   
   Figure 6- 2 Connect Bluetooth

How to Connect Loyverse POS to Print Order Receipt

1. Turn on the Bluetooth on your phone. Search Bluetooth device [P502A-1328] and connect it.
2. Run [Loyverse POS] and set printer from [Setting] →[Printers].
   
   Figure 6- 3 Setting Printer
3. Add a printer, and the printer's name can be anything you like. Printer model, select [Other model] → [Interface], select [Bluetooth].
   
   Figure 6- 4 Add Printer
4. Click [SEARCH] and select [P502A-1328] connection.
   
   Figure 6- 5 Search Bluetooth Printer
5. Paper width, select [58mm].
   
   Figure 6- 6 Paper Width
6. From [Advanced setting], set [Cutter ESC/POS commands], input [0A,0A,0A,1D,56,42,00].
   
   Figure 6- 7 Advance Setting
7. Turn on three selections: [Print receipts and bills], [Automatically print receipts]. Then, you can [PRINT TEST] at the bottom. Connection is successful.
   
   Figure 6- 8 Print Test

Video Link: https://youtu.be/VtGxf_kGExw.