MUNBYN ITP01 - Printer Manual

How to install ITP01 printer on a computer?

Preparation

1. Open the paper compartment cover and load paper correctly.
   Replace Paper
   1. Open The Cover
      
   2. Put Paper
      
   3. Close The Cover
      

2. Press and hold the power button for 2 seconds to turn on the printer
   

Power Indicator Status

• Green light on: Normal use status/full charged
• Red light on: Cover opened/No paper/Over-heat/Charging
• Green light flashing: Paper suction mode, please install the folded paper
• Red light flashing: Low battery, please charge in time

For Windows computer

1. Unplug the USB-A to type C adapter, and use the SB cable to connect to a Windows computer.
   
2. Driver installation
   Download link: munbyn.biz/A4Drivers
   
   1. Overview
      
   2. *Notice
      
      Notice:If the printer cannot be found when installing the driver, it means that the USB cable is in poor contact, and you need to unplug and plug the USB cable again.
3. Start to print
   
   Open the PDF file, using Adobe acrobat reader as an example, select the corresponding parameters to print, if there is a size option, please choose A4 size.
   Demo video link: munbyn.biz/A4WindowsV
   

For Mac PC

1. Connect to a Mac computer using the included data cable
   
2. Driver installation
   Download link munbyn.biz/A4Drivers
   
   1. After clicking the driver file, the Mac prompts you that it cannot be opened, you can follow the steps to open the trusted driver and open it.
      
      
   2. Add printer and print a file
      
      
      

Demo video link: munbyn.biz/A4MacV