Cancel Button - Ricoh Aficio BP20 User Manual

LED

Cancel button

Function
Printing demo page
Printing configuration
sheets
Network card Default
Setting (When you use the
Network card)
Manual Feeding
Cleaning inside printer
If you press the Cancel button for 0.5 second in Ready mode,
this LED lights and the Toner Save mode is enabled.
If you press this button once again, this LED turns off and the
Toner Save mode is disabled.
If the Online/Error and Toner Save LEDs blink, your
system has some problem. To solve the problem, see
"Troubleshooting Error Messages" on page 6.21.
In Ready mode, press and hold this button for about 2
seconds until all LEDs blink slowly, and release.
In Ready mode, press and hold this button for about 6
seconds until all LEDs blink fast, and release.
If your printer has a network card, the network
configuration sheet prints out with a printer
configuration sheet.
In Ready mode, press and hold this button for about
20 seconds until all LEDs blink slowly, and release.
This item restores the factory default of the network
configuration. This setting will only take effect after
you have reset the printer.
Press this button each time you load paper in the
Multi-purpose tray, when you have selected Manual
Feed for Source from your software application. For
detailed information, see "Using the Manual Feed
Mode" on page 3.12.
In Ready mode, press and hold this button for about
10 seconds until all LEDs turn on, and release. After
cleaning the printer, one "cleaning sheet" (see
page 5.7) is printed.
Description
Description
I 1.7
NTRODUCTION
1