Simulator; Sonar Set Up Parameters - Raymarine L1250DRC Owner's Handbook Manual

Chapter 4: System Setup

Simulator

The simulator enables you to operate your display without data from the
transducer and/or external data sources. The system set up simulator options
have the following functions:
• Data provides simulated numerical data and a waypoint display.
• Radar (integrated systems with a radar display) provides simulated radar
picture, with example targets. The picture does not change if you change
the range, although the range rings are adjusted (see Pathfinder Radar
documentation)
• Both provides simulated data and radar picture.
When the simulator is switched on, a SIMULATOR data box is displayed during
operation showing the simulation selected.
Fishfinder simulator mode is set in the Sonar setup menu, as described in
Section 4.4.

4.4 Sonar Set Up Parameters

The SONAR SET UP option enables you to set up the fishfinder according to
SONAR
your system configuration and your personal preferences.
SET UP¬
The following table lists the Sonar Set Up parameters and their options, shows
the factory default setting, and provides a space for you to make a note of your
new setting. Each parameter is described in the following subsections.
Table 4-3:
Parameter
TARGET DEPTH ID
COLOR BAR
DEPTH DIGIT SIZE
SONAR HSB MODE
DEPTH OFFSET
SPEED CALIBRATE
TEMP CALIBRATE
SONAR HISTORY
.
Fishfinder Set Up Parameters
Options
OFF
ON
OFF
ON
LARGE
SMALL
REPEATER
MASTER
Value
0% to 200%
-9.0 °F to +9.0 °F
LARGE or SMALL
Factory
Default New Setting
OFF
ON
LARGE
REPEATER
0.0
100%
0°F
LARGE
4-13