Waypoint Data Display; Editing The Waypoint Details - Raymarine L1250DRC Owner's Handbook Manual

Chapter 7: Standard Chart Operations

Waypoint Data Display

Waypoint data can be viewed in two ways: you can use the context-sensitive
cursor to select the waypoint and thus display the waypoint data box, or you
can view waypoint details on the waypoint list.
Note: To permanently display the target waypoint data box, select it in the Sys-
tem Set Up menu (see Section 4.3) and use the
boxes on.
➤ To display the waypoint data box, move the cursor over the waypoint.
The waypoint data box is displayed, this indicates waypoint number/name,
bearing and range (or latitude and longitude if selected in the system set up
menu).
WAYPOINT 001
BRG
RNG
While the cursor is over the waypoint, the waypoint soft keys are displayed.
➤ To remove the waypoint data box and soft keys either:
Move the cursor away from the waypoint, or press CLEAR.
➤ To display the waypoint details from the waypoint list:
Select the waypoint in the list as described above.
MARKS
The details for the selected waypoint are displayed in the lower half of the
window. Temperature, depth, date and time are included (if available) for
WAYPOINT
LIST waypoints placed at the vessel position.
To remove the Waypoint List and return to the default soft key display, press
CLEAR twice.

Editing the Waypoint Details

You can change the name, symbol and position of any waypoint.
➤ To edit a waypoint:
1. Select the waypoint, using the cursor or the waypoint list, as previously
described. The waypoint soft keys are displayed.
EDIT 2. Press the EDIT WAYPOINT soft key. The Edit Waypoint soft keys are dis-
WAYPOINT
played:
SYMBOL
3. To edit the symbol, press the SYMBOL soft key.
o
191 T
2.2nm
D4250-1
NAME POSITION
SCREEN
soft key to switch data
D4166-1
7-13