Operating Modes - Raymarine L1250DRC Owner's Handbook Manual

1-6
WARNING:
Do not cut the transducer cable or remove the connector.
Do not try to shorten or splice the cable. Cutting the transducer cable will
severely reduce sonar performance.
If the cable is cut, it must be replaced—it cannot be repaired.
CUTTING THE TRANSDUCER CABLE WILL VOID THE
WARRANTY.

Operating Modes

If you have a combined Fishfinder/Chartplotter unit, three full-screen
modes— fishfinder, chart, and data log—are available. You select the
operating mode using the DISPLAY key as described in Chapter 5.
In addition, if you have an
connected, you can set the display to radar mode, which provides radar
functionality to the display.
If you only have an L770D Plus or L1260D Plus fishfinder-only unit
connected, only sonar mode is available.
You can also set Windows On to split the display into two half-screen windows
(horizontal or vertical) to show supplementary data. Depending on the other
displays connected, you can use horizontal half screens to simultaneously
display sonar and chart, sonar and radar, or radar and chart windows.
Horizontal Half -Screen Window Options
Using horizontal half screens, the main operating mode is displayed in the
upper window; you choose what is displayed in the lower window. The
following information, if available on your system, can be shown:
Table 1-1:
Full-screen
mode
Sonar Mode
Chart Mode
Radar Mode
Data Log Mode
Series Pathfinder Plus Radar display
hsb
2
Horizontal Half-Screen Window Options
Horizontal Half-Screen Window Options
Course Deviation Indicator (CDI), Bearing and Distance
Indicator (BDI), Depth/Temp graph, Chartplotter, Radar
CDI, BDI, Navigation Data (data boxes), Radar, Sonar
CDI, BDI, Navigation Data, Chartplotter, Sonar
Half-screens not available
HD Series Fishfinders