Saving The Current Route - Raymarine L1250DRC Owner's Handbook Manual

7-22
6. To remove a waypoint from the New Route column, highlight the way-
point and press the REMOVE WAYPOINT soft key.
REMOVE
WAYPOINT
Note: The
highlighted waypoint to/from the Route column, regardless of which column
is selected.
7. When all waypoints have been entered, press the ACCEPT ROUTE soft key
ACCEPT
ROUTE
(or ENTER) to complete the route.
Note: The completed route is stored in the display unit and will be re-dis-
played if you turn the unit off then on again. However, on an integrated system
it is possible for a current route from another unit to overwrite this route. It is
therefore recommended that you save the route, as described in Saving the
Current Route.

Saving the Current Route

You can save up to 20 named routes in the route database list. These routes can
then be re-displayed and followed at a later date. When you save the route, all
new waypoints are saved in the Waypoint List.
Note: If the current route has not been saved, when you attempt an operation
that affects this route (for example: CLEAR ROUTE), you are prompted to save it.
➤ To save and name the current route:
1. To access the SAVE ROUTE soft key, press the ROUTE soft key, followed by
ROUTE
MORE.
2. Press the SAVE ROUTE soft key. The save route pop-up and the NAME ROUTE
SAVE
ROUTE
soft keys are displayed as illustrated in Figure 7-6.
3. The next available entry on the route list is highlighted.
(If desired, you can use the trackpad to select another position in the list.
This can be a blank slot or an existing route that you no longer require.)
INSERT WAYPOINT REMOVE WAYPOINT
or
HD Series Fishfinders
action adds/removes the