Intercom - Raymarine Ray218 Owner's Handbook Manual

58

Intercom

When a Raymic secondary handset is installed, Intercom operation enables voice
communications between the Raymic and the transceiver. You can initiate the call
from either the transceiver or second station. The following illustrates what is
displayed when the Ray218transceiver initiates the call.
78
HAIL/FOG/IC
HAILER
U FOG
S
INTERCOM
A
B A A
[BACK]
PLEASURE
SELECT
To initiate an Intercom call:
1. Select INTERCOM from the sending station (transceiver or Raymic):
2. On the receiving station, press PTT to accept the call and respond.
While PTT is depressed, that station displays TALKING and the other station
displays LISTENING. When neither station is pressing PTT , both LCD's display
PRESS PTT TO TALK.
3. On the sending station, when the LCD no longer reads TALKING, press PTT to
talk.
4. To terminate the call, press END from either station.
78
U
S
A
PLEASURE
CANCEL
Ray55: Select INTERCOM directly from the main menu.
—or—
Ray218: Select INTERCOM from the IC/HAIL/FOG menu.
—or—
Ray218: Press and hold the HAILER / INTCM key.
—or—
Raymic: Press and hold the OK / INTCM key.
The receiving station sounds an alert tone and displays a message that
an intercom call is incoming.
Ray218 and Ray55 Marine VHF Radios
on Transceiver
INTERCOM
CALLING
RAYMIC
A B A
on Raymic
78 INTERCOM
INCOMING
FROM
U
S BASE
A
PRESS PTT
B A A
TO ACCEPT
PLEASURE
CANCEL