Saving Channels To Memory - Raymarine Ray218 Owner's Handbook Manual

50

Saving Channels to Memory

The Ray218/Ray55 can store any channel (except WX channels) into memory. The
stored channels are the ones scanned in the Saved (Memory) Scan mode (see
page 46). Any number of channels can be saved as memory channels.
Separate memory channel groups exist for USA, International, and Canadian
frequency sets.
To add or remove a channel to/from memory:
1. Select SAVE CHANNEL from the VHF OPS menu.
2. Rotate the CH/OK knob to select the channel to be added/removed from
memory.
3. To add the selected channel from memory, press SAVE. The SAVED icon
appears to indicate the current channel has been saved in memory.
To remove the channel from memory, press CLEAR. The SAVED icon disap-
pears.
68
U
S
A
PLEASURE
SELECT
78
U
S
A
PLEASURE
BACK
You can also add the current channel to memory by pressing and holding the
SCAN/SAVE
holding the key removes the channel from memory.
VHF OPS
SCAN MODE
DISPLAY MODE
HI/LO POWER
A
SAVE CHANNEL
WATCH MODE
SAVE CHANNEL
SELECT CH
PRESS SAVE
OR CLEAR
B A
WATCH MODE
CLEAR SAVE
key on the microphone. If the channel is already saved, pressing and
Ray218 and Ray55 Marine VHF Radios
68
SAVE CHANNEL
SELECT CH
U
PRESS SAVE
S
OR CLEAR
A
A
WATCH MODE
PLEASURE
SAVE
BACK CLEAR
78
SAVE CHANNEL
SELECT CH
U
PRESS SAVE
S
OR CLEAR
A
B A
WATCH MODE
PLEASURE
BACK CLEAR SAVE
Select Channel