Channel Name - Raymarine Ray218 Owner's Handbook Manual

Chapter 4: Menu Settings

Channel Name

By default, the Ray218/Ray55 scrolls a descriptive name of up to 16 characters in
the line directly below the channel number and then stops to display a fixed
length of up to 9 characters. This option modifies the name for the currently-
selected channel from its default.
To change the Channel Name from the default:
1. From the VHF OPS menu, select CHANNEL NAME.
2. Press EDIT. The name for the currently-selected channel appears.
3. Use the CH/OK knob to modify the NAME field using the same technique
described in "Adding a new Entry" on page 77.
4. Press DONE when completed.
To completely remove the Channel Name, press CLEAR in step 2 above. If the
name is deleted, the space below the channel number is blank for that channel.
VHF OPS
72
HI/LO POWER
SAVE CHANNEL
U
S WATCH MODE
A
FREQ BAND
B B
CHANNEL NAME
SHIP/SHIP
SELECT
Select Characters
72
U
S
A
SHIP/SHIP
BACK
Press OK
72
U
S
A
SHIP/SHIP
BACK
CHANNEL NAME
SELECT CH
PRESS
EDIT OR
B B
CLEAR
EDIT CLEAR
EDIT NAME
CHANNEL NAME
FISHING
B B
DONE
EDIT NAME
72
CHANNEL NAME
PLEASURE
U
S
A
B B
SHIP/SHIP
BACK
72
26 06.0098N
U
080 04.8589W
S
A
AM10:33LOC
B B
FISHING
CH67
CH06 CH17
53