Cable Connections - Raymarine Ray218 Owner's Handbook Manual

20

2.3 Cable Connections

The radio has bullet connectors for power and cable connectors for attaching the
optional Raymic or Microphone Relocation Kit. The remaining wires are for
attaching NMEA, an optional external speaker, and an optional a hailer horn
(Ray218 only). The Ray218 has a single cable with mating connectors for this
purpose; the Ray55 has individual wire pairs. In either case, connect the wires as
shown in the following table. Other connections are discussed in the ensuing
sections.
Color
Gray
Purple
Blue
Brown
Yellow
Green
White
Black
Make cable connections as shown in the following figures.
Signal Connects to
NMEA IN + GPS
NMEA IN –
NMEA OUT + Chartplotter display unit (E Series, C Series, etc.)
NMEA OUT –
SPEAKER + Optional remote speaker, Raymarine part no. E46006
SPEAKER –
HAILER + Optional horn speaker, Raymarine part no. M95435
HAILER – (Ray218 only)
Ray218 Rear Connections
Ray218 and Ray55 Marine VHF Radios
Antenna
Ground