Sensitivity; Hailer/Fog Horn/Intercom; Hailer (Ray218 Only) - Raymarine Ray218 Owner's Handbook Manual

56

Sensitivity

Use this setting to switch the transmit power from high to low. Press the L/D soft
key to toggle between full receiver sensitivity (Distant mode) and attenuated
receiver sensitivity (Local mode). The LOCAL icon appears while in Local mode
and then is removed in Distant mode.
71 VHF OPS
WATCH MODE
FREQ BAND
U
CHANNEL NAME
S
A
FAVORITE CH
B A
SENSITIVITY
PLEASURE
SELECT

4.3 Hailer/Fog Horn/Intercom

Hailer and Fog operations are available on the Ray218, but not on the Ray55. You
must purchase and install an optional hailer horn for these features to operate.
Intercom operations are available on both the Ray218 and Ray55.
This menu item provides access to auxiliary functions. While these operations are
Note:
active, you cannot send or receive radio calls. The exception is in AUTO FOG mode, be-
tween soundings.

Hailer (Ray218 only)

The Hailer operation enables the unit to use a Hailer Horn as a loudspeaker. Press
and hold PTT to place the unit in Hailer mode. Anything spoken into the handset
is amplified and broadcast from the Hailer Horn (but not transmitted over the
radio). To adjust the Hailer Horn broadcast volume, use the up/down arrow soft
keys while pressing and holding PTT .
78
HAIL/FOG/IC
HAILER
FOG
U
S
INTERCOM
A
A [BACK]
PLEASURE
SELECT
71
SENSITIVITY
SET
LOCAL
U
S
OR
A
B A
DISTANT
PLEASURE
BACK
78 HAILER
LISTENING
U
S PRESS PTT
A
TO TALK
A
PLEASURE
END
Ray218 and Ray55 Marine VHF Radios
71
U
S
A
PLEASURE
L/D
BACK
78
PTT
U
S
A
PLEASURE
END
SENSITIVITY
SET
LOCAL
OR
B A
DISTANT
L/D
HAILER
TALKING
VOL: 10
A
HORN VOLUME