Shokz OPENRUN S805, S806 - Headphone Manual

Table of Contents

Contents

1 How It Works
2 Extra Features
3 Care and Maintenance
- 3.1 Charging Tips
- 3.2 What's in the Box
4 Troubleshooting
5 Documents / Resources
- 5.1 References
- 5.2 Download manual

How It Works

Headphone Controls

Controls Overview

ON/OFF

Turn on the headphones:
Press and hold the Power/Volume + Button until the LED Indicator flashes blue.
*Audrey will say: "Welcome to Shokz".

Turn off the headphones:
Press and hold the Power/Volume + Button until the LED Indicator flashes red.
*Audrey will say: "Power off".

Pairing

Start with OpenRun turned off.
Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately.
Open your device's Bluetooth settings and select " OpenRun by Shokz." Audrey will say "connected."

How to Wear

Pick up the headphones, bring them behind the back of the base of your neck, position the earhooks on your ears, then enjoy your music!
How to Wear
*Wearing your headphones the wrong way could cause discomfort. The transducers should rest in front of your ears.

Volume

Operate volume controls while audio is playing.

How to change volume:
While your audio is playing, adjust headphone volume by pushing either the Volume + or Volume - buttons.
*A "beep" will sound when the volume is at its max.

*Listening with headphones at high volume may affect your hearing and the audio will be distorted.

Multifunction Button

Play/pause music
Click once

Next song
Double-click while music is playing

Previous song
Triple-click while music is playing

Answer call
Click once

End call
Click once

Play music	Click once
Pause music	Click once
Next song	Double-click while music is playing
Previous song	Triple-click while music is playing
Switch language	Double-click while on pairing
Answer call	Click once
End call	Click once during a call
Answer call waiting and end current call	Press and hold for 2 seconds when receiving a second call
Ignore a call	Press and hold for 2 seconds during an incoming call
Activate voice assistant	Press and hold for 2 seconds when device is on standby
Redial last number	Double-click on standby

*Only applicable for phone calls, not online calls

Check Battery Status

Operate controls while audio is not playing

How to check battery status:
Click the Volume + or Volume - button while music is paused, Audrey will tell you the battery status:

* "Battery high/Battery medium/Battery low/Charge me"

Extra Features

EQ Modes

Standard Mode:
Balanced frequency for listening to music

Vocal Booster Mode:
Enhanced intermediate frequencies for audiobooks, podcasts, etc.

Switching EQ Modes

Operate controls while music is playing

How to switch EQ mode:
Press and hold both buttons (Power/Volume + Button and Volume - Button) while music is playing until you hear a beep.
Switching EQ Modes
*Audrey will say: "EQ changed".

Multipoint Pairing

Pair Two Devices
Switch between two devices seamlessly with multipoint pairing

Operate controls with headphones powered off

Start with your headphones powered off.
Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
Press and hold the multifunction button and Volume + button until Audrey says, "multipoint enabled."
Open first device's Bluetooth^® menu and select "OpenRun by Shokz." Audrey will say, "connected".
Turn your headphones off.
Re-enter pairing mode by pressing and holding Volume + until Audrey says "pairing"and the LED indicator flashes red and blue alternately.
Open second device's Bluetooth^® menu and select "OpenRun by Shokz." Audrey will say, "connected."
Turn your headphones off.
Turn your headphones on. Your headphones are now connected to both devices.

Turn Multipoint Pairing Off

Operate controls with headphones powered off.

Start with your headphones powered off.
Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
Press and hold the multifunction button and Volume - button until Audrey will say, "Multipoint disabled."

Restore Factory Settings

Operate controls with headphones powered off.

Start with your headphones powered off.
Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
Press and hold the multifunction button, Volume – button and Volume + button until hear two beeps and feel the vibration.
Turn your headphones off. OpenRun is now reset and can be re-paired to your device.

Changing Languages

Your headphones have four built-in languages: Chinese, English, Japanese and Korean.

Follow the instruction when headphones powered off

Start with your headphones powered off.
Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
Double-press the multifunction button. Languages have been switched when you hear the corresponding language.

Care and Maintenance

Charging Tips

The headset will automatically shut down when charging
When the headphones are at low battery, there will be a "charge me" prompt and the red light will flash intermittently. Use the corresponding USB-C charging cable for charging.
The LED indicator will turn red during the charging process and the headphones will automatically turn off. The LED indicator will turn from red to blue when charging is complete.

What's in the Box

If any part of your product is damaged or missing, do not use it. Contact authorized Shokz dealer or Shokz customer service.
*Please note that the packaging envelope may vary depending on the sales region.