shokz OPENMOVE, S661 - Headset Manual

shokz OPENMOVE, S661 - Headset Manual

Also See for OPENMOVE:

Advertisement

shokz OPENMOVE, S661 - Headset Manual

How It Works

Device Controls

How It Works - Device Controls

ON/OFF

How It Works - Turning ON/OFF

Turn on the headphones:
Press and hold the Power/Volume + Button until the LED Indicator flashes blue.
*Audrey will say: " Welcome to Shokz"

Turn off the headphones:
Press and hold the Power/Volume + Button until the LED Indicator flashes red.
*Audrey will say: " Power off"

Pairing

  1. Start with OpenMove turned off.
    Pairing - Step 1
  2. Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately.
  3. Open your device's Bluetooth settings and select " OpenMove by Shokz." Audrey will say "connected."
    Pairing - Step 2 - Open bluetooth settings

How to Wear

How It Works - How to Wear
Pick up the headphones, bring them behind the back of the base of your neck, position the earhooks on your ears, then enjoy your music!
*Wearing your headphones the wrong way could cause discomfort. The transducers should rest in front of your ears.

Volume

Operate volume controls while audio is playing.

How It Works - Changing the Volume
How to change volume:
While your audio is playing, adjust headphone volume by pushing either the Volume + or Volume ‒ buttons.
*A "beep" will sound when the volume is at its max.


*Listening with headphones at high volume may affect your hearing and the audio will be distorted.

Multifunction Button

How It Works - Using the Multifunction Button
Multifunction Button

Play/pause music
Click once
Answer call
Click once
Next song
Double-click while music is playing
End call
Click once
Previous song
Triple-click while music is playing
Play music Click once
Pause music Click once
Next song Double-click while music is playing
Previous song Triple-click while music is playing
Switch language Double-click while on pairing
Answer call Click once
End call Click once during a call
Answer call waiting and end current call Press and hold for 2 seconds when receiving a second call
Ignore a call Press and hold for 2 seconds during an incoming call
Activate voice assistant Press and hold for 2 seconds when device is on standby
Redial last number Double-click on standby

*Only applicable for phone calls, not online calls

Check Battery Status

Operate controls while audio is not playing

How It Works - Checking Battery Status
How to check battery status:
Click the Volume + or Volume - button while music is paused, Audrey will tell you the battery status:
* "Battery high/Battery medium/Battery low/Charge me"

Extra Features

EQ Modes


Standard Mode:
Balanced frequency for listening to music


Vocal Booster Mode:
Enhanced intermediate frequencies for audiobooks, podcasts, etc.

Switching EQ Modes

Operate controls while music is playing

Extra Features - Switching EQ Modes
How to switch EQ mode:
Press and hold both buttons (Power/Volume + Button and Volume - Button) while music is playing until you hear a beep.
*Audrey will say: " Standard Mode/Vocal Booster Mode."

Multipoint Pairing

Extra Features - Pairing Two Devices
Pair Two Devices
Switch between two devices seamlessly with multipoint pairing

Operate controls with headphones powered off

  1. Start with your headphones powered off.
  2. Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
  3. Press and hold the multifunction button and Volume + button until Audrey say "multipoint enabled."
    Multipoint Pairing - Step 1
  4. Open first device's Bluetooth menu and select "OpenMove by Shokz."Audrey will say "connected".
    Multipoint Pairing - Step 2 - Select first device
  5. Turn your headphones off.
  6. Re-enter pairing mode by pressing and holding Volume + until Audrey says "pairing" and the LED indicator flashes red and blue alternately.
  7. Open second device's Bluetooth menu and select "OpenMove by Shokz."Audrey will say "connected."
    Multipoint Pairing - Step 3 - Select second device
  8. Turn your headphones off.
  9. Turn your headphones on. Your headphones are now connected to both devices.
    Multipoint Pairing - Step 4

Turn Multipoint Pairing Off

Operate controls with headphones powered off.

  1. Start with your headphones powered off.
  2. Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
    Turn Multipoint Pairing Off - Step 1
  3. Press and hold the multifunction button and Volume - button until Audrey will say "multipoint disabled."
    Turn Multipoint Pairing Off - Step 2

Restore Factory Settings

Operate controls with headphones powered off.

  1. Start with your headphones powered off.
  2. Press and hold Volume + until Audrey will say "pairing." and the LED indicator flashes red and blue alternately.
    Restore Factory Settings - Step 1
  3. Press and hold the multifunction button, Volume ‒ button and Volume + button until hear two beeps and feel the vibration.
    Restore Factory Settings - Step 2
  4. Turn your headphones off. OpenMove is now reset and can be re-paired to your device.

Changing Languages

Your headphones have four built-in languages: Chinese, English, Japanese and Korean.
Follow the instruction when headphones powered off

  1. Start with your headphones powered off.
  2. Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
    Changing Languages - Step 1
  3. Double-press the multifunction button. Languages have been switched when you hear the corresponding language.
    Changing Languages - Step 2

Care and Maintenance

Charging Tips

The headset will automatically shut down when charging

When the headphones are at low battery, there will be a "charge me" prompt and the red light will flash intermittently. Use the corresponding USB-C cable for charging.
The LED indicator will turn red during the charging process and the headphones will automatically turn off. The LED indicator will turn from red to blue when charging is complete.
Charging Tips and indication

Storage and Maintenance

  • Store the headphones in a cool, dry place. The working temperature should be 0~45°C(32~113°F).Working in a cold/hot temperature, highly humid area, or low air pressure environment may reduce the battery life.
  • Keep the product away from heat sources, direct sunlight, combustible gas or other liquids.
  • Keeping the charging port dry before connecting to the charger will reduce the risk of damage.
  • These headphones are water-resistant, but are not waterproof. Please do not submerse the headphones in water.
  • Clean the headphones with a soft dry cloth.
  • Do not charge right after exercising, in case there's sweat inside the charging port, which could lead to circuit burning while charging.
  • After storage for a long period, please charge the headphones before using again.

Note
Design and specification are subject to change without notice. For the most up-to-date product information, please visit www.shokz.com.

burn hazardburn hazard
To avoid the risk of explosion, fire, or leakage from toxic chemicals, please do not disassemble the product or replace, deform, or mutilate the battery.

Troubleshooting

If you have any trouble or problems, please visit https://uk.shokz.com/pages/support-new for more support!

What's in the Box

If any part of your product is damaged or missing, do not use it. Contact authorized Shokz dealer or Shokz customer service.
*Please note that the packaging envelope may vary depending on the sales region.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download shokz OPENMOVE, S661 - Headset Manual

Advertisement

Need help?

Need help?

Do you have a question about the OPENMOVE and is the answer not in the manual?

Questions and answers

Table of Contents