Select And Run A Saved Route - Rand McNally Intelliroute TND-510 User Manual

Multi-Stop Route List
Multi-Stop Route List
Rand McNally IntelliRoute ® TND TM 510 User's Guide

Select and Run a Saved Route

Main Menu
From the :
1. Tap Choose Destination > Multi-Stop Trips.
The Multi-Stop Route List displays.
2. Tap on the route to select it.
The Route Stop Window displays.
3. Tap Start Trip.
The Confi rmation Window displays.
4. Tap Begin New Route to navigate to the location.
See "Address Confi rmation Window" on page 72 for more options.
5. If the vehicle mode is set to Truck and the Load Option is set to Prompt,
a Confi rmation Window asked if the Truck is empty or loaded.
6. Tap the appropriate truck load option to create a route.
The IntelliRoute TND calculates the route to your fi rst stop.
When you have reached the stop, a message displays.
7. Tap:
• Next Stop - To calculate a route to the next stop in the route
• Skip Next Stop - To skip the next stop and calculate a route to the stop
after the next one.
• End Current Trip - To end the route at the current stop.
Version 2.0.1 68