In A City - Rand McNally Intelliroute TND-510 User Manual

Select Address List
POI Category Window
Select <Point of Interest Type> Window
Rand McNally IntelliRoute ® TND TM 510 User's Guide

In a City

Main Menu
From the :
1. Tap Choose Destination > Points of Interest > City.
2. Type the fi rst few characters in the city name.
The Select Address List displays.
3. Tap on the city/state from the displayed list.
The POI Category Window displays.
4. Tap:
• Travel Center and fi lter for amenities. (See page 43.)
• Truck Service and fi lter for services. (See page 44.)
• Parking & Rest Area, Weigh Station, CAT Scale, or Truck Dealer.
• More and select a Consumer POI. See page 45 and page 46.
The Select <Point of Interest Type> Window displays POI locations.
Note: If no locations are found, a message displays.
5. Tap on a location on the list.
The Confi rmation Window displays:
6. Tap Begin New Route to navigate to the location.
See "Truck-Related Point of Interest Confi rmation Window" on page 74 for
more options.
7. If the vehicle mode is set to Truck and the Load Option is set to Prompt,
a Confi rmation Window asked if the Truck is empty or loaded.
8. Tap the appropriate truck load option to create a route.
Version 2.0.1 48