Create A Custom Poi Location File; Add A Custom Poi Location Method 1 (Latitude/Longitude) - Rand McNally Intelliroute TND-510 User Manual

Rand McNally IntelliRoute ® TND TM 510 User's Guide

Create a Custom POI Location File

Use the following steps to create a custom POI location fi le.
1. Create a .txt or .csv fi le. (Use a standard text editor or spreadsheet program).
2. Name the fi le.
3. Save the fi le.
The fi le contains one line for each location.
See:
• "Add a Custom POI Location Method 1 (Latitude/Longitude)" on page 119.
• "Add a Custom POI Location Method 2 (Street Address)" on page 120.
• "Add a Custom POI Location Method 3 (Full Information)" on page 121.
Add a Custom POI Location Method 1 (Latitude/
Longitude)
Note: Enter longitude fi rst.
1. Enter the longitude followed by a comma(,)
2. Enter the latitude fi rst followed by a comma (,)
3. Enter the location name.
Note: Do not add a comma after the location name .
4. When fi nished adding locations, save the fi le.
5. Send the fi le to your TND. See page 133.
Version 2.0.1 119