2Nd Call Alert; Handset Name; Update Handset List; Display Setting - RCA 25270 User Manual

2nd Call Alert

If it is set to On, you will hear the alert tone when you are in conversation and there is an
incoming call from another line.
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to 2ND Call Alert .
2. Press SELECT Soft key. Use the VOL (- or +) button to scroll to your selection. The default
setting is On.
3. Press SELECT Soft key to save your selection and the screen displays Saved .

Handset Name

From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to the Handset name .
2. Press SELECT Soft key. The default name is Handset .
3. Use the touch-tone pad to enter a name (up to 11 characters). More than one letter
is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key
twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for
the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert
a space between the first and last name. Press the 7 key 4 times for the letter S; press
the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key
for the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake, press DIR/CID button to move the cursor forward
or backward, and then use the mute/del button to backspace and delete one
character at a time.
4. Press the SAVE Soft key to save your name. You will hear a confirmation tone and the
display shows Saved.

Update Handset List

This function is used to update all registered handsets from the current handset name list.
From the Phone Setting Menu:
1. Press the vol (- or +) button to scroll to the Update Handset List.
2. Press SELECT Soft key.
3. The latest handset name list stored in the base will be sent to all registered handsets.

Display Setting

1. Make sure your phone is OFF (not in Talk mode).
2. Press the menu button on handset or the MENU Soft key on base to go to the main
menu.
3. Press VOL (- or +) button to scroll to Display Setting .
4. Press SELECT Soft key to confirm and you may program the following items: Language,
Contrast and Backlight (base only).
(only applicable for handset)
(only applicable for base)
19