Tineco FLOOR ONE S7 STEAM Series - Floor Washer Manual
Overview
![Tineco - FLOOR ONE S7 STEAM Series - Overview Overview]()
- STEAM/BOOST STEAM Button
- Power On/Off
- Digital Display
- Dirty Water Tank Release
- Dirty Water Tank Handle
- LED Headlights
- Self-cleaning Button
- Tube
- WiFi/Mute/Language Switch Button
- Clean Water Tank (CWT)
- Dirty Water Tank (DWT)
- Brush
- Brush Roller Cover
- Brush Roller
- Cleaning Tool
- Dry Filter & Holder
- Accessory Holder
- Adaptor
- Charging Dock
Digital Display
![Tineco - FLOOR ONE S7 STEAM Series - Digital Display Digital Display]()
- AUTO Mode
- Steam Making
- STEAM Mode
- WiFi Indicator
- DWT Full
- CWT Empty
- BOOST STEAM Mode
- Brush Roller Tangled
- Boiler Error
- Battery
- Battery level / Steam preparation countdown
- Self-cleaning
- Dirt Monitoring Loop (Blue to red according to the dirt amount)
Accessories
Note:
Accessories may vary between markets. If you require more accessories, please go to www.tineco.com or store.tineco.com.
![]() | Brush Roller Soft roller head with bristles can be used to vacuum and wash at the same time. It can be easily cleaned with the self-cleaning function. |
![]() | Dry Filter Dry filter and filter net can block large particles and debris, ensure the appliance's durability. * Please install the dry filter before use, or it may lead to weak suction. |
![]() | Cleaning Tool A full brush to clean the DWT, brush chamber and opening. The tool also has a bristled end to remove dirt and mud on the roller and DWT. |
Assembly
How to Assemble/Disassemble
Note:
For water tank and brush assembly, please refer to "Operation" and "Maintenance".
![]()
To assemble the handle, insert it into the appliance until you hear a click.
![]()
In the event that the handle needs to be disassembled, press the spring to release the handle with a tool (like a screwdriver) and lift the released handle from the appliance.
![]()
Install the dry filter holder and accessory holder on the dock.
Operation
Preparing for Use
- Before first use, please charge the appliance for 4-5 hours (refer to "Charging Instructions" for details).
* Based on results from Tineco lab tests. Lab temperature 39.2°F (4°C) ~ 104°F (40°C).
![]()
Press the
button the appliance will start in AUTO mode by default, then press
button to switch to STEAM mode, BOOST STEAM mode or AUTO mode. Press the
again to turn off the appliance after cleaning is complete.
WiFi/Mute/Language Switch Button
![]()
- Press to turn on/off the voice prompt.
- Press twice to switch languages. (More voice language options will be added, please refer to the actual product.)
- Hold for 3 seconds to connect to network.
![]()
The appliance will stop working when put upright and start running again when reclined.
* Do not recline more than 142° to avoid water leakage.
![]()
Place the appliance on the charging dock vertically after use for charging and storing.
Note:
- Selection of the appropriate mode depends on the actual demand.
- Do not vacuum foamed liquid.
- To vacuum water left on the surface, the appliance will keep running for 3 seconds after power off.
Filling Clean Water Tank
![]()
Press the Clean Water Tank release button to remove it from the appliance.
![]()
Place the tank back into the appliance. You should hear a "click" sound if done correctly.
![]()
Open the tank cap, and then fill the tank with tap water to the Max line.
Note: Only use water under 140°F/60°C, don't mix chemical solution. DO NOT USE HOT WATER.
Charging Instructions
To charge the appliance, place the appliance on the charging dock and plug the adaptor into a power outlet.
![]()
- To charge the appliance, connect the external charging cord to the charging dock and plug it into the wall outlet.
- To avoid tripping hazards, please place the appliance on the charging dock near a wall during charging.
![]()
- Only charge the appliance with the adaptor supplied by Tineco.
- In case of long-term non use, the appliance must be charged once every 3 months for optimal performance. It may take 4-5 hours for a full charge.
- Store indoors in a dry place. Do not expose the appliance to sunlight or freezing temperatures. Recommended temperature range: 39.2°F (4°C) ~ 104°F (40°C).
Cleaning Mode Selection
AUTO Mode ![]() | - In AUTO mode, the iLoop sensor automatically detects how dirty the floor is and applies the appropriate amount of clean water and suction power accordingly.
- A red dirt monitoring loop indicates pollutant intensive area, and a blue loop indicates less pollutants are detected. This mode automatically applies the best cleaning solution.
|
STEAM Mode ![]() | - Press
button to enter into STEAM mode. It will take 20-50s to prepare steam. And there will be 6 holes to spray steaming. Apply STEAM Mode when deep cleaning is needed |
BOOST STEAM Mode ![]() | - Press
button to enter into BOOST STEAM mode. It will take 20-50s to prepare steam. And there will be 2 holes to spray steaming. Apply BOOST STEAM mode when cleaning for heavy-polluted area is needed. |
SUCTION Mode ![]() | - With wifi connected, open the APP and select the SUCTION mode on APP, the appliance will enter into SUCTION mode.
- In SUCTION mode, the appliance will absorb water. We recommend using this mode on wet surfaces.
|
Note:
Keep sharp objects away from the digital display screen to avoid scratches and scrapes.
Runtime
- In AUTO mode: ~40 minutes
- In STEAM / BOOST mode: ~20 minutes
- Estimated runtime data was obtained by a Tineco Laboratory.
Charging Time
- A full charge takes approximately 4-5 hours.
- Estimated data was obtained by Tineco Laboratory under ambient temperatures between 39.2°F (4°C) to 104°F (40°C).
App
All the functions can be performed using Tineco App. Download the app from App Store, Google Play and Tineco Official Site.
![]()
![www.apple.com]()
![play.google.com]()
![]()
Note:
The default language for voice prompt is English, you can set other languages via App.
Voice Prompt (Contents may vary, please in kind prevail.)
Status | Reminder |
Voice prompts on | Voice prompts enabled. |
Voice prompts off | Voice prompts disabled. |
Connect Tineco app | Download Tineco app and connect with appliance. |
Turn on the appliance | Auto mode. |
Switch to Steam mode | Steaming Mode. |
Switch to Boost Steam mode | Boost Steaming Mode. |
First time to start the Steam mode/Boost steam mode | Steam preparation for the first time is relatively long, please wait. |
Press the STEAM/BOOST STEAM mode button | Start preparing the steam. |
Steam is ready for use | Steam is ready for use. |
Clean Water Tank is empty | Insufficient water in the Clean Water Tank. Please add water. |
Dirty Water Tank is full | Dirty Water Tank is full. Please empty and clean the Dirty Water Tank. |
Need self-cleaning after decting | Please turn on self-cleaning function to ensure effective cleaning. |
After self-cleaning | Self-cleaning complete. Please empty and clean the Dirty Water Tank and the Pipe underneath it to prevent odors. |
Bettery level 10%~20% | Battery low. |
Bettery level 0%~10% | Battery low. Please charge the appliance. |
Turn off the appliance | Powered off. Place appliance on charging dock. |
Ready for charging | Charging. |
Clean Water Tank is empty during the appliance working | Insufficient water in the Clean Water Tank, turned into AUTO mode. |
Clean water tank is empty during Steam/Boost steam mode | Insufficient water in the Clean Water Tank, unable to make steam. |
Dirt water tank is uninstalled | Please install the dirty water tank. |
Brush cover is uninstalled | Please install the brush roller cover correctly. |
When Motor, pump or battery goes wrong | Error! Please contact customer service. |
Select Suction mode on APP | Suction Mode. |
Detect it is dirty during the appliance works | To optimize cleaning performance, please perform self-clean cycle. |
User press the self-cleaning button when the appliance is dormant | Please place appliance on the charging dock to begin self-cleaning. |
Maintenance
Note:
- For optimal performance and odor avoidance, alwaysclean and dry DWT, filters, brush roller, brush roller cover completely after each use.
- Please make sure each part is installed correctly or the appliance may not work properly.
- Do not soak the appliance.
- Some water may remain in the appliance due to factory inspection.
- After maintenance, place the appliance on the charging dock vertically. Do not expose the appliance to direct sunlight, store it indoors in a dry place.
Main Body
![]()
To reduce the risk of injury, switch off before performing maintenance.
![]()
Use a cloth to clean the surface with neutral detergent. The cloth should be dry to prevent water from entering the appliance.
![]()
When iLOOP illuminates red, remove Dirty Water Tank, clean the dirt sensor with a damp cloth or the cleaning tool.
Dirty Water Tank
![Tineco - FLOOR ONE S7 STEAM Series - Dirty Water Tank Dirty Water Tank]()
- When dirty water reaches the Max line, the appliance then stops working, shows a remainder on the display and plays a voice prompt.
- Pull up the tank lid to empty the DWT. Use the cleaning tool to remove remaining debris. Rinse the inside of the DWT and then place back into the appliance.
Dirty Water Tank Lid
![Tineco - FLOOR ONE S7 STEAM Series - Dirty Water Tank Lid Dirty Water Tank Lid]()
If the Dirty Water Tank lid and the filter inside are blocked, remove the tank lid and the filter, rinse both parts with water.
Dry Filter
![Tineco - FLOOR ONE S7 STEAM Series - Dry Filter Dry Filter]()
Grasp recessed area on each side of the dry filter and pull upward. Rinse the filter under running water and it must be completely dry before recombining with the DWT lid.
*A spare dry filter is provided with your appliance for convenient replacement.
Self-cleaning
![]()
- Place the appliance on the charging dock after use, the sensor will auto-detect the level of dirt.
- Press the self-cleaning button, and the appliance will select the self-cleaning mode based on the actual battery level for self-cleaning.
- Once complete, please clean the Dirty Water Tank. And the appliance will begin charging.
Note:
- Ensure the charging dock is plugged under Self-cleaning mode:
- When battery level<10%, press the Self cleaning button, charging instead of self-cleaning will be activated first.
- When battery level>10%, press the Self-cleaning button, self-cleaning with normal water temperature will be activated.
- When battery level>20%, press the Self cleaning button, self-cleaning with steam will be activated.
- Before self-cleaning cycle, please clean the DWT and ensure the water level in the CWT>40%.
Brush Roller Cover
![]()
Squeeze latches on the cover and pull upward to remove.
![]()
Rinse with water.
![]()
While replacing, always latch the brush cover into place to avoid leakage.
Brush Roller
![]()
Remove the brush roller by grabbing the brush roller tab and pulling out.
![]()
Use the cleaning tool to remove hair and debris wrapped around the roller and rinse the roller with water. Put the brush roller back into the accessory holder, and allow it to dry completely before reinstalling.
![]()
Wash and remove hair and debris from the brush roller chamber with water and cleaning tool.
![]()
Replace the brush roller by inserting its end into the left side of the holder, then attach the roller tab to the magnetic buckle on the right side to lock into place.
Note:
- A spare brush roller is provided with your appliance for convenient replacement.
- To maintain optimal performance, replace the brush roller every 8 months.
SCAN THE QR CODE BELOW TO GET PRODUCT CARE VIDEOS.
![]()
![]()
Troubleshooting
Problem | Possible cause | Solution |
The appliance does not turn on | - No power
- Auto protection for overheating
| - Charge the appliance
- Restart after cooling down
|
Weak suction | The dry filter is not installed, or the dry filter is dirty | Install the dry filter or clean and allow it to dry completely |
Brush roller tangled indicator blinking Voice prompt: - Please install the brush roller correctly.
![]() - Please check the brush roller.
- Please install the brush roller cover correctly.
| - The brush roller is blocked
- The brush roller is not installed
- Brush roller cover is not installed correctly
| - Remove blockages
- Install the brush roller correctly
- Install the brush roller cover correctly
|
WiFi indicator is off | WiFi is not connected | Follow the in-app guide to connect to WiFi |
CWT empty indicator blinking Voice prompt - Insufficient water in the Clean Water Tank, turned into AUTO mode.
![]() - Insufficient water in the Clean Water Tank, unable to make steam.
| CWT is empty | Refill CWT |
DWT full indicator blinking Voice prompt Dirty Water Tank is full. Please empty and clean the Dirty Water Tank. | The dirty water in DWT has reached the MAX line | Empty the dirty water and then reinstall the DWT |
Boiler error indicator blinking Voice prompt: Boiler error, please restart the appliance. | Boiler error | Restart the appliance |
All lights off in operation | Battery overheat or malfunction | Cool the appliance down and restart |
Battery level<10% Voice prompt: Battery low. Please charge the appliance. | Low power | Charge the appliance, or restart |
iLoop illuminates red Voice prompt: Clean the dirty water tank or the debris channel. | Dirt sensor malfunction or blocked | Remove blockages, clean the debris channel, or restart |
Note:
If the above troubleshooting guide fails to help, please visit our website www.tineco.com for further support.
Important Safety Instructions
SAVE THESE INSTRUCTIONS
Household use only.
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
![]()
To reduce the risk of fire, electric shock, or injury:
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance shall not be performed by children without supervision.
- The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Use only indoors, on non-carpeted floor surfaces such as vinyl, tile, sealed wood, etc. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.
- Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets or plants.
- Use only as described in this manual. Use only manufacturer's recommended attachments.
- Do not use with a damaged cord or plug. If appliance has been dropped, damaged, left outdoors, dropped into water, or is not working as it should, return it to a service center.
- Do not handle charger, including charger plug, and charger terminals with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
- Keep hair, loose clothing, fingers, and all parts of your body away from openings and moving parts.
- Use extra care when cleaning on stairs.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without filter.
- Prevent unintentional activation. Ensure the switch is in the off-position before picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.
- Always switch off the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
- Recharge only with the charger specified by Tineco. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use appliances only with specifically designated Tineco battery packs. Use of any other battery packs may create a risk of injury and fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid comes into eye contact, seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 266°F (130°C) may cause an explosion.
- Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- This appliance contains battery cells that are non-replaceable. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
- Always turn off this appliance before connecting or disconnecting the motorized nozzle.
- Do not charge or store the appliance outdoors or inside the car. Only charge, store or use the battery in a dry indoor area where the temperature is higher than 39.2°F (4°C) but lower than 104°F (40°C). The charger is for indoor use only.
- Do not use to pick up ultrafine particles, such as lime, cement, sawdust, gypsum powder, or ashes.
- Do not use to pick up sharp objects, such as metallic nails, pieces of glass, metal paper clips, or pins.
- Do not use to pick up hazardous material and chemicals, such as solvent, drain cleaner, strong acids, or strong alkali.
- Stop using immediately if the appliance is overheating, making unusual noises, producing unusual odors, performing low suction, or leaks electricity.
- Turn cleaner OFF and disconnect from electrical outlet for long-term storage.
- Always clean the Dirty Water Tank after each use to avoid potential blockage, which may lead to low suction power, motor overheating, or reduce the service life of the appliance.
- Store appropriately indoors in a dry place after use.
- Do not place or submerge appliance in standing water or try to clean flooded areas.
- All data and technical instructions of this manual are based on results from lab tests of Tineco or designated third parties. The company reserves all rights for final explanations.
- The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
- A hazard may occur if the appliance runs over the supply cord.
- Do not use the appliance when the water depth is more than 5mm above the surface.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Do not immerse product in water.
- "Warning: Danger of scalding, not for Space Heating Purpose"
- To reduce the risk of scalding, do not turn over the steam-cleaning nozzle, or touch the surface of the nozzle.
- Only use water to refill the reservoir. Do not use any type of chemicals or additives.
- Do not apply steam directly to any person or animal.
- Do not touch the steam-cleaning nozzle or adjacent surfaces when steam-cleaning or when the nozzle is heated.
Range of Usage
- The cordless hard floor cleaner is to be used on indoor hard floors, such as vinyl, tile, sealed wood, etc. Use on a rough surface may not get the best performance.
- Keep your appliance away from heat sources, such as fireplace or heater, to avoid casing deformation.
- Do not use to pick up flammable or combustible liquids, ultrafine particles, sharp objects, hazardous material, chemicals or anything that is burning or smoking, as described above.
About the Appliance
- Do not modify or attempt to repair the appliance except as indicated in the instructions for operating and cleaning.
- Charge the appliance with the Tineco adaptor. Input Voltage: AC 100-240V. Both high and low voltages can damage the adaptor, appliance, or even cause danger to the user.
- Use extra care when cleaning on stairs.
- Ensure that the Power Switch is in the OFF-position before picking up or carrying the appliance. Do not lay flat or lean the appliance so as to prevent dirty water from entering into the motor.
- To avoid being tripped accidentally, please put away the appliance on the charging dock.
- Always install the Dirty Water Tank and Clean Water Tank properly before use.
- Do not allow the appliance or charger to get wet to avoid risk of fire or injury caused by a short circuit.
Specifications
Product | FLOOR ONE S7 STEAM SERIES |
AC Input | 100-240V~ |
Voltage | 25.2V = 3900mAh Lion |
Rated Power | 240W |
Running Time | AUTO mode: 40mins STEAM/BOOST STEAM mode: 20mins |
Charging Time | 4~5 hrs |
Water Flow Rate | 20~200ml/min |
CWT Capacity | ~0.8L |
DWT Capacity | ~0.72L |
Waterproof | IPX4 |
- For use only with TINECO charger KL-WA300100-X, YLJX2I-T300100.
TINECO IS HERE TO HELP.
We'll get back to you within 1 business day.
![]()
www.tineco.com
1-855-292-8864
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Tineco FLOOR ONE S7 STEAM Series - Floor Washer Manual
Need help?
Do you have a question about the FLOOR ONE S7 STEAM Series and is the answer not in the manual?
Questions and answers