Tineco FLOOR ONE S6 Series Manual

*Actual product may differ from illustration.

TINECO IS HERE TO HELP.

_{www.tineco.com}
We'll get back to you within 24 hours.

MORE LANGUAGES ARE AVAILABLE ON OUR OFFICIAL WEBSITE

Specifications

Product	FLOOR ONE S6 SERIES
AC Input	220-240V~
Voltage	21.6V 4000mAh Li-Ion
Rated Power	220W
Running Time	AUTO: ~35 mins MAX: ~28 mins
Charging Time	4-5 hrs
Water Flow Rate	30~100ml/min
CWT Capacity	~0.8L
DWT Capacity	~0.7L
Waterproof	IPX4
Drying charging dock
Input (drying)	220-240V~ 50/60Hz 620W
Input (charging)	220-240V~ 50/60Hz 32W
Output	26V 1A

Overview

1. Self-cleaning Button
2. Mode Switch
3. Power On/Off
4. Digital Display
5. Dirty Water Tank Release
6. Dirty Water Tank Handle
7. Dirty Water Tank (DWT)
8. WiFi/Mute/Language Switch Button
9. Tube
10. Clean Water Tank (CWT)
11. Brush Roller Cover
12. Brush Roller
13. Deodorizing & Cleaning Solution
14. Cleaning Tool
15. Dry Filter
16. Drying & Charging Dock

Digital Display

1. WiFi Indicator
2. DWT Full or Blocked
3. AUTO Mode
4. Drying Brush Roller Indicator
5. CWT Empty
6. Brush Roller Tangled Indicator
7. SUCTION Mode
8. Tineco Logo
9. Self-cleaning Icon
10. Battery Level Indicator

Note:
Accessories may vary among markets. If you require more accessories, please go to www.tineco.com or store.tineco.com.

Deodorizing & Cleaning Solution

Removes dirt, grime, grease and tough stains from most types of hard surfaces, like tile, marble, sealed hardwood floors, and more.

Always use Tineco solution in your appliance.

Add one bottle cap of solution to each full tank of clean water.

Brush Roller

Soft roller head with bristles can be used to vacuum and wash at the same time. It can be easily cleaned with the self-cleaning function.

Dry Filter

Dry filter and filter net can block large particles and debris, ensure the appliance's durability.

* Please install the dry filter before use, or it may lead to weak suction.

Cleaning Tool

A full brush to clean the DWT, brush chamber and opening. The tool also has a bristled end to remove dirt and mud on the roller and DWT.

Assembly

How to Assemble/Disassemble

Note:
For water tank and brush assembly, please refer to "Operation" and "Maintenance".

To assemble the handle, insert it into the appliance until you hear a click.

In the event that the handle needs to be disassembled, press the spring to release the handle with a tool (like a screwdriver) and lift the released handle from the appliance.

Tips:

WiFi/Mute/Language Switch Button

• Press to turn on/off the voice prompt.
• Press twice to switch languages. (More voice languages will be added, please refer to the actual product for now.)
• Hold for 3 seconds to connect to network.

Operation

Preparing for Use

Before first use, please charge the appliance for 4-5 hours (refer to "Charging Instructions" for details). * Based on results from Tineco lab tests. Lab temperature 39.2°F (4°C) ~ 104°F (40°C).

Press the button and the appliance will start in AUTO mode by default. Press it again to turn off the appliance. Switch between AUTO, MAX and SUCTION modes by pressing the button.

The appliance will stop working when put upright and start running again when reclined.

* Do not recline more than 142° to avoid water leakage.

Tips (SUCTION mode not available):

• Solution mode/ Water Only mode: Appliance starts with Solution mode by default. Power on while the appliance is upright, hold for 3s to switch between the two modes.
• Switch to Water Only mode: LED Loop: Red → Blue (use water only)
• Switch to Solution mode: LED Loop: Blue → Red (use cleaning solution)
  
  Place the appliance on the charging dock vertically after use for recharge and storage.

Note:

• It is crucial to choose the right mode based on the CWT contents to achieve the highest level of dirt detection efficiency.
• Do not vacuum foamed liquid.
• To vacuum water left on the surface, the appliance will keep running for 3 seconds after power off.
• Suction mode is only available in selected modes, please refer to the actual product.

Filling Clean Water Tank

Open the tank cap, and fill with tap water to the Max line. When deep cleaning is necessary, add one bottle cap of solution to the CWT and tightly close the cap.

Note:
Only use water under 140°F/60°C.
DO NOT USE HOT WATER.

Charging Instructions

• To charge the appliance, plug in the drying & charging dock and place the appliance on it.
• To avoid tripping hazards, please place the appliance on the charging dock near a wall during charging.

• Only charge the appliance with the adaptor supplied by Tineco.
• During long periods of not being used, the appliance must be charged once every 3 months for optimal performance. It may take 4-5 hours for a full charge.
• Store indoors in a dry place. Do not expose the appliance to sunlight or freezing temperatures.
  Recommended temperature range: 39.2°F (4°C) ~ 104°F (40°C).

Cleaning Mode Selection

AUTO Mode

• In AUTO mode, the iLoop sensor automatically detects how dirty the floor is and applies the appropriate amount of detergent and suction power.
• A red dirt monitoring loop indicates more dirt is detected, and a blue loop indicates less dirt is detected. This mode automatically provides the best cleaning solution.

MAX Mode

• In AUTO mode, press the button to enter MAX mode Voice will be prompted. The AUTO indicator on the display will turn off.
• In MAX mode, the appliance will apply max suction power and will spray water/solution for deeper cleaning.

SUCTION Mode (only available in selected modes)

• In MAX mode, press the button to enter SUCTION mode.
• In SUCTION mode, the appliance only absorbs water and does not spray. We recommend using this mode on the wet surface.

Note:
Keep sharp objects away from the digital display screen to avoid scratches and scrapes.

Runtime

• When in AUTO mode, the runtime is approximately 35 minutes. When MAX power is used, the runtime is approximately 28 minutes.
• Estimated runtime data was obtained by Tineco Laboratory.

Charging Time

• A full charge takes approximately 4-5 hours.
• Estimated data was obtained by Tineco Laboratory using ambient temperatures ranging from 39.2°F (4°C) to 104°F (40°C).

Indicator

When in Use

Battery level ≥ 10%: battery indicator will be illuminated.

Battery level < 10%: battery indicator will be blinking.

Off: no power detected or possible battery malfunction.

Solid red light: dirt sensor malfunction or blocked.

Indicator blinking: CWT is empty.

Indicator blinking: DWT is full or channel has a blockage.

Indicator blinking: brush roller has a blockage.

Illuminated: WiFi has successfully connected.

Blinking: WiFi is connecting.

Off: WiFi is not connected, please connect to the network.

Indicator blinking: appliance is in need of self-cleaning.

Indicator blinking: appliance is in charging, please wait for it to dry.

During Charging

Tineco indicator: breathing.

Fully Charged

In 5 minutes: Tineco indicator illuminated.
After 5 minutes: all indicator lights turn off.

App

All the functions can be performed using the Tineco app. Download the Tineco app from App Store, Google Play and Tineco Official Site.

Note:
The default setting for voice prompt is English, you can set other languages via App.

Voice Prompt

(Contents may vary, please in kind prevail.)

Maintenance

Note:

• For optimal performance and to prevent odors, alwaysclean and dry DWT, filters, brush roller, brush roller cover completely after each use.
• Please make sure each part is installed correctly or the appliance may not work properly.
• After maintenance, place the appliance on the charging dock vertically. Do not expose the appliance to direct sunlight, and store it indoors in a dry place.

Main Body

To reduce the risk of injury, switch off before performing maintenance.

Use a cloth to clean the surface with a neutral detergent. The cloth should be dry to prevent water from entering the appliance.

Clean the dirt sensor with a damp cloth or the cleaning tool.

Dirty Water Tank

• When dirty water reaches the Max line, the appliance will stop working, show a reminder on the display and play a voice prompt.
• Pull up the tank lid to empty the DWT. Use the cleaning tool to remove remaining debris. Rinse the inside of the DWT and place back into the appliance.

Dry Filter & Waste Separator

Grasp recessed area on each side of the dry filter and pull upward. Rinse under running water and must be completely dry before recombining with the lid of the DWT.

* A spare dry filter is provided with your appliance for convenient replacement. The waste separator can be removed and rinsed under the running water.

* The function of the waste separator is to separate solid waste.

* The appliance can function normally without the waste separator, so users can decide whether to keep it or not.

Brush Roller Self-cleaning

1. Place the appliance on the charging dock after use, the sensor will auto-detect the level of dirt.
2. When you hear the voice prompt "please begin selfcleaning cycle", press the self-cleaning button and begin the process.
3. Once complete, you will hear the voice prompt

"self-cleaning completed, please clean the Dirty Water Tank." At this point, the appliance will begin charging.

Note:

• Ensure the charging dock is plugged in and the battery level>20%.
• Before self-cleaning cycle, please clean the DWT and ensure the water level in the CWT>40%.

Brush Roller Cover

Squeeze latches on the cover and pull upward to remove.

Rinse with water.

While replacing, always latch the brush cover into place to avoid leakage.

Brush Roller

Remove the brush roller by grabbing the brush roller tab and pulling out.

Remove hair and debris from the brush roller chamber and the opening with the cleaning tool.

Use the cleaning tool to remove the hair and debris wrapped around the roller and then rinse the roller with water. Replace the brush roller back into the accessory holder, and allow it to dry completely before reinstalling.

Replace the brush roller by inserting its end into the left side of the holder, then attach the roller tab to the magnetic buckle on the right side to lock into place.

Note:

• A spare brush roller is provided with your appliance for convenient replacement.
• To maintain optimal performance, replace the brush roller every 8 months.

Brush Roller Replacement

Pull up the roller handle to remove it. Once removed, install the handle into the new brush roller. When uninstalling, do not directly pull on the pull ring of the brush roller.

Troubleshooting

Problem	Possible cause	Solution
The appliance does not turn on	Auto protection for overheating	Restart after cooling down
Weak suction	The dry filter is not installed, or the dry filter is dirty	Install the dry filter or clean and allow it to dry completely
Brush roller tangled indicator blinking Voice prompt: Please clean the brush roller	The brush roller is blocked	Remove blockages
WiFi indicator is off	WiFi is not connected	Follow the in-app guide to connect to WiFi
CWT empty indicator blinking Voice prompt: Clean Water Tank empty, please refill water and cleaning solution	CWT is empty	Refill CWT
DWT full indicator blinking Voice prompt: Please clean Dirty Water Tank	The dirty water in DWT has reached the MAX line	Empty the dirty water and then reinstall the DWT
All lights off in operation	Battery overheat or malfunction	Cool the appliance down and restart
Battery level indicator blinking Voice prompt: Low battery, please charge	Battery low	Charge the appliance, or restart
Self-cleaning icon blinking	Brush roller is dirty	Start self-cleaning

Note:
If the above troubleshooting guide fails to provide a solution, please visit our website www.tineco.com for further support.

2-YEAR LIMITED WARRANTY

• Only applies to purchases made from authorized retailers of Tineco.
• Is subject to the adherence of the requirements outlined in this instruction manual, and is subject to further conditions outlined below.
• This warranty is governed by and construed under the laws of the country in which the purchase took place. We provide 2-year warranty or a warranty period as stipulated by applicable local law, whichever is longer.

WARRANTY SERVICE

Register: We highly recommend that upon purchase, you register your appliance by logging into our official website (www.tineco.com) or scanning the QR code (see right) to enjoy more exclusive benefits. To register, please enter the whole serial number (remove the Clean Water Tank and find it on the back of the appliance).

Failure to register your product won't diminish your warranty rights.

How to Claim: Please retain your proof of purchase. To make a claim under our Limited Warranty, you need to provide your serial number and the original purchase receipt with the purchase date and order number on it.

All work will be carried out by Tineco or its authorized agency.

Any replaced defective parts will become the property of Tineco.

Service under this warranty will not extend the period of this warranty.