Advertisement
The Optus X Swift 5G is specially designed for the Optus Network to give you the best experience possible. It's easy to set up and use, but if you need extra help, this guide will take you through the process. Plus it's packed with tips to help you get the most out of your new phone.
While you're activating your SIM, we'll ask you to pick your Prepaid plan. We have plans to suit different types of usage and if the one you choose doesn't work for you, you can change it. Access to our 5G Network is not available across all plans. Please check optus.com.au/prepaidplans
All information contained in this booklet is correct as at October 2021. For the most up-to-date information visit optus.com.au/prepaidplans
To request the barring of all premium SMS and MMS services go to optus.com.au/premiumsms
Emergency calls to 000 are free; you don't need credit.
Your ID may need to be verified by the government DVS (Document Verification Service) so it will need to be current and valid.
For more details about your Prepaid plan, visit optus.com.au/CIS and optus.com.au/standardagreement
Your Optus nano-SIM card can be installed or removed while the phone is turned on.
To avoid damage to the phone, do not use any other kind of SIM cards, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano-SIM card from your service provider.
Insert the tip of the tray eject tool into the hole on the card tray. Pull out the card tray and place a nano-SIM card and a microSDXC card (optional) on the tray, as shown.
Carefully slide the tray back into place.
NOTE:
Please use the tray eject tool included in the box.
Otherwise the card tray may not be ejected.
Never replace the included tray eject tool with sharp objects.
Ensure that the tray eject tool is perpendicular to the hole.
Otherwise, the phone may be damaged.
Your phone's battery should have enough power for the phone to turn on, find a signal, and make a few calls.
You should fully charge the battery as soon as possible.
Use only approved chargers and USB Type-C cables. The use of unapproved accessories could damage your phone or cause the battery to explode.
Do not remove the back cover. The battery is not removable. Removal may cause fire or explosion.
NOTE:
If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 minutes. Contact customer service if you still cannot power on the phone after prolonged charging.
Make sure the battery is charged before powering on.
NOTE:
If the screen freezes or takes too long to respond, try pressing and holding the Power key for over 10 seconds to restart the phone.
Your phone automatically goes into sleep mode when it is not in use for some time. The display is turned off to save power and the keys are locked to prevent accidental operations. You can wake up your phone by turning on the display and unlocking the keys.
NOTE:
If you have set a face verification, a fingerprint, an unlock pattern, a PIN or a password for your phone, you'll need to use your face or fingerprint, draw the pattern, or enter the PIN/password to unlock your screen.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Optus X Swift 5G and is the answer not in the manual?
Questions and answers