Multi-Zone Setup; Connecting A Siriusconnect Tuner; Connecting To The Network Through Lan Interface - Pioneer VSX-1021-K Operating Instructions Manual

03 Connecting your equipment

MULTI-ZONE setup

This receiver can power up to two independent
systems in separate rooms after you have made
the proper MULTI-ZONE connections.
Different sources can be playing in two zones at
the same time or, depending on your needs, the
same source can also be used. The main and
sub zone have independent power (the main
zone power can be off while sub zone is on) and
the sub zone can be controlled by the remote or
front panel controls.
Making MULTI-ZONE connections
It is possible to make these connections if you
have a separate TV and speakers for the sub
zone (ZONE 2). You will also need a separate
amplifier if you are not using the MULTI-ZONE
setup using speaker terminals (ZONE 2) on page
20 for the sub zone.
MULTI-ZONE listening options
The following table shows the signals that can
be output to ZONE 2:
Sub Zone Input functions available
DVD, TV/SAT, DVR/BDR, VIDEO 1,
VIDEO 2, HOME MEDIA GALLERY,
iPod/USB, CD, CD-R/TAPE, TUNER,
ZONE 2
ADAPTER PORT, SIRIUS
(Outputs analog audio, composite
video.)
It is not possible to down-convert the audio
and video input signals from the HDMI input
terminals, digital input terminals (OPTICAL and
COAXIAL) and the COMPONENT VIDEO input
terminals and output them to ZONE 2.
20
En
Basic MULTI-ZONE setup (ZONE 2)
% Connect a separate amplifier to
the AUDIO ZONE 2 OUT jacks and a TV
monitor to the VIDEO ZONE 2 OUT jack,
both on this receiver.
You should have a pair of speakers attached to
the sub zone amplifier as shown in the follow-
ing illustration.
Sub zone (ZONE 2) Main zone
HDMI
IN 1 VIDEO 1 IN BD IN DVD IN
ASSIGNABLE 1
VIDEO IN CONTROL VIDEO AUDIO
ZONE 2 DVR/BDR CD-R/TAPE
IN
OUT
TV/SAT VIDEO 1
OUT
IN IN
OUT
MONITOR
IR OUT
IN
DVR/
OUT
BDR
IN
OUT IN DVD IN
IN 1
(DVD)
ASSIGN
ABLE
IN
2
(DVR/
BDR)
IN
AUDIO IN
MONITOR
R L OUT
Y P B P R TV/SAT VIDEO 1
COMPONENT VIDEO
MULTI-ZONE setup using speaker
terminals (ZONE 2)
You must select ZONE 2 in Speaker system set-
ting on page 64 to use this setup.
% Connect a TV monitor to the VIDEO
ZONE 2 OUT jack on this receiver.
You should have a pair of speakers attached to
the surround back speaker terminals as shown
below.
Sub zone (ZONE 2) Main zone
COAXIAL
HDMI IN 1 VIDEO 1 IN
IN
1
ASSIGNABLE 1
( DVD )
CONTROL VIDEO
ZONE 2
IN
OUT
TV/SAT
OUT
IN
VIDEO IN MONITOR
IR OUT
IN
OUT DVR/
BDR
SURROUND
OUT IN
R
IN 1
(DVD)
ASSIGN
ABLE
IN 2
(DVR/
BDR)
L R
MONITOR
OUT
Y P
B
COMPONENT VI
DVR/BDR IN
ZONE 2
L
OUT
R AN
FM
CD
75
L
IN SIR
R
Connecting a SiriusConnect
L
IN
R
Tuner
DVD
To receive SIRIUS Satellite Radio broadcasts,
you will need to activate your SiriusConnect
tuner.
LAN (10/100) COAXIAL AS
DVD IN DVR/BDR IN OUT
IN
1
DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V 0.6 A MAX) DVD
( )
O
R CD-R/TAPE ZONE 2
ADAPTER PORT
L
(OUTPUT 5 V
OUT
0.1 A MAX)
R ANTENNA
CD FM UNBAL
75
L AM LOOP
SIRIUS A FRONT CENTER SUR
IN
R L R
R
IN
L
IN
R
SUBWOOFER
T VIDEO 1 DVD CAUTION: ATTENTION:
PRE OUT SPEAKER IMPEDANCE ENCEINTE D'IMPEDANCE DE
6 -16 . 6 -16 .
Antenna
TM
SiriusConnect
HOME tuner
You will also need to connect the antenna and
TM
AC adapter to the SiriusConnect
! For instructions on playing the SIRIUS Radio,
see Listening to Satellite Radio on page 31 .
Connecting to the network
through LAN interface
ASSIGNABLE
IN IN
IN
2
1 2
OPTICAL
ASSIGNABLE
( CD ) ( TV/SAT ) ( DVR/BDR )
By connecting this receiver to the network via
the LAN terminal, you can listen to Internet
radio stations. To listen to Internet radio sta-
SURROUND BACK / ZONE 2 FRONT HEIG
L R L (Single) R tions, you must sign a contract with an ISP
(Internet Service Provider) beforehand.
When connected in this way, you can play audio
SELECTABLE SEE INST
SPEAKERS
Class 2 Wiring SELECTABLE files stored on the components on the network,
VOIR LE M
including your computer, using HOME MEDIA
GALLERY inputs.
C
OUT LAN (10/100)
DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V 0.6 A MAX)
ADAPTER PORT
(OUTPUT 5 V
0.1 A MAX)
TENNA
UNBAL
AM LOOP
RIUS A FRONT CENTER
R L
TM
IN
SUBWOOFER
CAUTION: ATTENTION:
PRE OUT SPEAKER IMPEDANCE ENCEINTE D'IMPEDANCE DE
6 -16 . 6 -16 .
LAN
to LAN port
PC
Connect the LAN terminal on this receiver to
the LAN terminal on your router (with or with-
out the built-in DHCP server function) with a
straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your
router. In case your router does not have the
AC adapter
built-in DHCP server function, it is necessary
to set up the network manually. For details, see
Network Setup menu on page 66 .
tuner.
LAN terminal specifications
! LAN terminal : Ethernet jack
(10BASE-T/100BASE-TX)
Internet
Modem
3 2 1 WAN
Router
LAN cable
(sold separately)