Multi-Zone Setup - Pioneer SC-81 Operating Instructions Manual

Hide thumbs Also See for SC-81:
Table of Contents

Advertisement

03

MULTI-ZONE setup

This receiver can power up to four (SC-82)/three (SC-81) independent systems in separate rooms after you have
made the proper MULTI-ZONE connections.
Different sources can be playing in three zones at the same time or, depending on your needs, the same source
can also be used. The main and sub zones have independent power (the main zone power can be off while one (or
both) of the sub zones is on) and the sub zones can be controlled by the remote or front panel controls.
Making MULTI-ZONE connections
It is possible to make these connections if you have a separate subwoofer (SC-82 only) and speakers for your pri-
mary (ZONE 2) sub zone, and a separate amplifier (and speakers) for your secondary (ZONE 3 (SC-82 only)) sub
zone. You will also need a separate amplifier if you are not using the speaker terminals for your primary sub zone
(For detail, see
MULTI-ZONE setup using speaker terminals (ZONE 2)
Also, if the separate receiver in the sub zone has an HDMI input terminal, this unit's HDMI input can be played as
HDZONE.
Here are three (SC-82)/two (SC-81) primary sub zone setups possible with this system. Choose whichever works
best for you.
Important
! ZONE 3 is a function for SC-82 only. It cannot be selected or set with SC-81.
! The settings must be changed at ZONE Setup in order to use the multi-zone function
! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function
MULTI-ZONE listening options
The following table shows the signals that can be output to ZONE 2, ZONE 3 and HDZONE:
Sub Zone
Input functions available
SAT/CBL, DVR/BDR, INTERNET RADIO, PANDORA, MEDIA SERVER, FAVORITES, iPod/
ZONE 2
USB, TV, CD, TUNER, ADAPTER PORT
<a>
(Outputs analog audio)
ZONE 3
SAT/CBL, DVR/BDR, TV, CD, TUNER, ADAPTER PORT
<a>
(Outputs analog audio)
HDZONE
BD, DVD, SAT/CBL, DVR/BDR, INTERNET RADIO, PANDORA, MEDIA SERVER, FAVOR-
(HDMI)
ITES, iPod/USB, HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5, HDMI 6/MHL
<b>
(Outputs HDMI audio and video signals)
a ! It is not possible to down-convert the audio input signal from the HDMI input terminals or digital input terminals (OPTICAL
and COAXIAL) and output them to ZONE 2.
! It is not possible to down-convert the audio input signal from the HDMI input terminals or digital input terminals (OPTICAL
and COAXIAL) and output them to ZONE 3.
! SC-82 only: If Speaker System is set to HDZONE and the power for ZONE 2, ZONE 3, and HDZONE are all on, when SAT/CBL,
DVR/BDR, TV, CD, or TUNER input is selected for ZONE 2, the input for ZONE 3 will be the same. When one of the above inputs
is selected for ZONE 3, the same limitations apply to ZONE 2.
b ! The inputs that can be switched differ according to how terminals HDMI IN 1 to IN 6 are assigned. Upon shipment from the
factory, the input terminals are assigned to DVD, SAT/CBL, HDMI 3, HDMI 4, HDMI 5 and HDMI 6, in order starting from
terminal HDMI IN 1.
! The video/audio signals of the RCA analog input terminals, the digital input terminals (OPTICAL and COAXIAL) and the COM-
PONENT VIDEO input terminals cannot be up-converted and output to the HDZONE.
! When any of the HDMI 3 to HDMI 6/MHL inputs is selected in the main zone, it is only possible to select the same input as in
the main zone for the HDZONE. (Inputs other than the ones listed here can be selected.)
The same limitations apply when one of the above inputs is selected for the HDZONE.
When any of the INTERNET RADIO, PANDORA, MEDIA SERVER, FAVORITES, iPod/USB or ADAPTER PORT
inputs is selected in the main zone, it is only possible to select the same input as in the main zone for the sub
zone. (Inputs other than the ones listed here can be selected.)
The same limitations apply when one of the above inputs is selected for the sub zone.
Basic MULTI-ZONE setup (ZONE 2)
1
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
2
When a subwoofer is connected, we recommend setting HPF (High Pass Filter) at ZONE Setup to ON
on
page 34
).
(page 98
).
(page 98
).
33
Note
Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver.
SC-82 only: Connect a subwoofer to the SUBWOOFER ZONE 2 OUT jack on this receiver.
).
Sub zone (ZONE 2)
LINE LEVEL
AUDIO IN
INPUT
R
L
2
1
Connecting your equipment
(page 98
Main zone
ZONE 2
OUT
ZONE 2
SUBWOOFER
Z N 2
UT
E 2
U W O R

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-82

Table of Contents