Demonstration Program - Philips HQ9190CC User Manual

EnglisH
8
symbol is blinking. The shaving unit symbol then
disappears. You will hear a short confirming beep.
- If you have not reset the system after these 7
shaves, the system will automatically reset itself.

Demonstration program

The shaver has a unique demonstration program.
Press the on/off button for 6 seconds.
,
After 3 seconds the lock symbol appears; keep the
on/off button pressed.
The demonstration will start automatically. During
the demonstration the shaver will be automatically
switched on 2 times. You can interrupt the
demonstration by pressing the on/off button.
Charging
Make sure the shaver is switched off before you
start charging it.
Charging takes approx. 1 hour.
You can also shave without charging by connecting
the shaver to the mains.
A fully charged shaver has a cordless shaving time of
up to 30 days.
Charging by means of the powerplug
1 Put the appliance plug in the shaver.
2 Put the powerplug in the wall socket.
3 Remove the powerplug from the wall socket
and pull the appliance plug out of the shaver
when the battery has been fully charged.