Philips HQ9190CC User Manual page 5

indication and the plug symbol or the battery
symbol.
Battery running low
Number layout:
,
When the battery is running low, the display shows a
blinking minutes indication and blinking plug symbol
when you switch the shaver off. You will also hear a
few short beeps.
Battery symbol layout:
,
When the battery is running low, the display shows
a blinking battery symbol and blinking plug symbol
when you switch the shaver off. You will also hear a
few short beeps.
Battery empty
To indicate that the battery voltage is too low
,
to operate the appliance, 'LO' appears on the
display.
Recharge the battery. See chapter 'Charging'.
,
Cleaning shaver
When the shaver is due to be cleaned, the tap
,
symbol with blinking water jet appears on the
display.
replacing shaving heads
When the shaving heads need to be replaced
,
(every two years), the shaving unit symbol starts
blinking when you switch the shaver off. At the
same time you will hear a beep.
- If you do not replace the shaving heads right away,
the shaving unit symbol remains visible during the
next 7 shaves.
- You can reset the system by pressing the on/off
button for 3 seconds while the shaving unit
EnglisH