1. Manuals
  2. Brands
  3. Proton Manuals
  4. Automobile
  5. FZ 2011
  6. Owner's manual

Proton FZ 2011 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Identifier: MANOWNFZ001FL
Generated: 19.10.2011 10:32:24 a.m.
OWNER'S MANUAL
FZ
Part No. : PW846909
Language : ENG
Market : MHR
Model : FZ
NOTE: This page is just a placeholder and not the final cover page.
MANOWNFZ001FL 19 OCT 2011 PW846909

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FZ 2011 and is the answer not in the manual?

Questions and answers

Related Manuals for Proton FZ 2011

Summary of Contents for Proton FZ 2011

  • Page 1 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. OWNER'S MANUAL Part No. : PW846909 Language : ENG Market : MHR Model : FZ NOTE: This page is just a placeholder and not the final cover page. MANOWNFZ001FL 19 OCT 2011 PW846909...
  • Page 2 Foreword OWN000FWORD302 Thank you for selecting PROTON product as your vehicle. This owner's manual will add to your understanding and full enjoyment of the many fine features of this vehicle. It contains information prepared to acquaint you with the proper way to operate and maintain your vehicle for the ut- most in driving pleasure.

  • Page 3: Table Of Contents

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Table of contents General information Locking and unlocking Seats and seatbelts Instruments and controls Starting and driving For pleasant driving Vehicle care For emergencies Maintenance Specification...
  • Page 4 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Instruments and controls OWN001OVIEW11006 1 - Side defroster 2 - Side ventilator. P. 90 3 - SRS-Passenger's airbag module. P. 30 * 4 - DVD player with monitor * 5 - Centre ventilator 6 - Front fog lamp switch * 7 - Hazard warning flasher switch.
  • Page 5 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Interior OWN001OVIEW090 1 - SRS passenger airbag / Tissue box compartment * 2 - Sun visor. 3 - Room lamp. P. 61 4 - Rear view mirror 5 - Armrest (driver's or rear passenger). P.
  • Page 6 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m.

  • Page 7: General Information

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. General information Installation of accessories Modifications or alterations to the electrical or fuel systems Genuine parts Safety instructions for used engine oils...

  • Page 8: Installation Of Accessories

    Genuine Parts may void any future war- This vehicle is fitted with laminated systems OWN002GINFO025 ranty claim. PROTON will not be liable windscreen glass which meets general for any malfunction of your vehicle that requirements and applications of safety may have been caused by the use of PROTON has always offered safe, high glass standards for motor vehicles.

  • Page 9: Locking And Unlocking

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Locking and unlocking Keys Keyless entry system Electronic immobilizer (Anti-theft starting system) Doors Child-protection” rear doors Central door lock Hood Tailgate Electric window control Electric window control – rear doors...

  • Page 10: Keyless Entry System

    • Press the button once to lock the Record the number for future order room lamp switch at door position) vehicle. from an authorized PROTON dealer • Room lamp will be on for 30 2 - Disarming button in the event that the original keys seconds •...
  • Page 11 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. NOTE within approximately 30 seconds, relocking will automatically occur Driver and front passenger doors and the system will rearm. does not activate the remind mode, After auto relock, if the room lamp instead it will reject the arm mode is still set to door position, it will command until the door is properly fade-in.

  • Page 12: Electronic Immobilizer (Anti-Theft Starting System)

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. When pressing the panic button in If the following conditions are ob- Electronic immobilizer arm mode (3), the system will func- served after pressing the remote (Anti-theft starting system) tion as panic; control, the self-contained battery may need to be replaced (refer to OWN003LOCKS242 •...
  • Page 13 (3) Two keys are provided. If you As soon as the ignition key is taken out lose a key, order a replacement from the key cylinder at lock position, from an authorised PROTON all doors will be automatically unlock. dealer as soon as possible. You DOINW003R09006...

  • Page 14: Central Door Lock

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Set the inside lock knob to the lock pos- seat. The lever is provided on each rear ition, only the door will be in locking door. If the lever is set to the locked position.

  • Page 15: Hood Release

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Hood unlocking up to 30 times. If this oc- OWN003LOCKS230 curs, wait a few seconds before operating the inside central lock Hood release knob again. Speed locking DOINW003R09020 Speed locking reset condition; Speed locking mechanism will be reseted automatically when the ignition key is taken out from key cylinder and any of DOINW003R09010...
  • Page 16 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. NOTE Unlatch the support bar and return to Tailgate OWN003LOCKS231 its hook. Slowly lower the hood to a Only open the hood when the wipers position 30 cm above the closed posi- are in park position. tion, then allow it to drop to its original Operation from outside the vehicle position.

  • Page 17: Electric Window Control

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. tailgate, try pulling it up to ensure it is Rear left door window bringing it down to avoid any properly closed. Refer on page 95 for Window lock switch injuries. Luggage storing precautions” in load- Operation ing luggage.

  • Page 18: Lock Switch

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Electric window control – Lock switch (3) Never try to operate a driver's switch passenger's rear doors OWN003LOCKS233 switch in opposing directions at the same time; this may cause the window to become stuck. NOTE Once the battery cable is disconnected, or the fuse is replaced, the door win-...

  • Page 19: Seats And Seatbelts

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Seats and seatbelts Front seat adjustment Rear seat adjustment Head restraints (front and rear seat) Armrest Seat belts Rear seat belts (when not in use) Child restraints Pregnant women restraint Supplementary restraint system (SRS) Deployment of airbag...

  • Page 20: Front Seat Adjustment

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Front seat adjustment To adjust forward or backward (2) Be sure that the seat is securely locked in the desired position. OWN004SEATS206 If the seat is not securely locked in place, the seat could suddenly move and cause a serious accident.

  • Page 21: Rear Seat Adjustment

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Rear seat adjustment To recline the seatback or put your hand on it to re- duce its momentum. OWN004SEATS219 Adjustment of seat height - driver's Seat adjustment (2nd row seat) * seat only * DOINW004R09026 In order to recline the seatback, lean forward slightly , pull the seatback lock...
  • Page 22 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. To restore upright Seat adjustment for flat fold (2nd row & 3rd row seat) DOINW004R09023 Flat fold for 3rd row seat DOINW004R09039 After the 3rd row passenger has seated, 1. Adjust the head restraint to the low- restore the 2nd row seat assembly up- DOINW004R09017 est position.

  • Page 23: Warning Label

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. This warning label is fitted to remind a 3rd row seatback adjustment locked, it may move suddenly and 3rd row occupant to restore the 2nd row cause injury to the passengers. seat in a secure upright positions before starting a journey.
  • Page 24 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. seat back can be folded for- ward or backward. (2) Have the seat adjusted by an adult to avoid accident due to the spring effect of the seat during folding and unfolding. (3) When operating the seatback lock lever, the seatback will suddenly return to its original position.
  • Page 25 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. DOINW004R09019...

  • Page 26: Head Restraints

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Head restraints (front and Type B – Head restraint for 2nd row and Removal of head restraints 3rd row seats rear seat) * OWN004SEATS207 To raise the head restraint, move it up- ward. To lower the restraint, move it Adjustment of the height downward while pushing the height adjusting knob (1) in the direction of...

  • Page 27: Seat Belts

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. to confirm that it does not come out of Passenger side (2nd row) CAUTION the seatback. (1) Do not use one seat belt for 1 - Height adjusting knob more than one person. Sharing seat belts can be dangerous.
  • Page 28 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. To fasten Lap belt (2nd row) (2) The seat belts must not be twisted when worn. Pull the belt slightly to adjust slackness as desired. To unfasten DOINW004R09012 DOINW004R09013 Pull out the seat belt slowly from the To fasten;...
  • Page 29 If this occurs, must always be adhered according have your system checked by an author- to the rules set by your local author- ised Proton dealer immediately. ity. Rear seat belts (when not Driver's and front passenger seat...

  • Page 30: Child Restraints

    Accordingly, PROTON recom- starting the car. mends that the child be re- (4) The belt should be replaced if strained in the rear seat.

  • Page 31: Pregnant Women Restraint

    WARNING When installing a child restraint system, (2) Children who are not properly PROTON recommends that pregnant refer to the instructions provided by the buckled up can strike other women use the available seat belts. manufacturer of the restraint system.

  • Page 32: Supplementary Restraint System (Srs)

    (3) With your seat belt properly ised PROTON dealer after any colli- cause the airbag is not de- fastened, sit in an upright pos- sion. We recommend that seat belt...
  • Page 33 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Do not lean your head or chest to the steering wheel. For vehicle with passenger airbag, do not lean your head or chest close to the instru- ment panel. Do not put feet or legs on or against the instrument panel.
  • Page 34 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. General Information for the side fatal injury from the deploying side against or be close to the area airbag. of the seat where the side airbag * airbag is located. • Do not allow any rear seat oc- cupant to hold onto the seat It is dangerous if the side WARNING...

  • Page 35: Airbag System

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. How the supplemental restraint system (SRS) works * DOIKW004R03023 DOIKW004R06044 All the airbags are properly marked as A - Side airbag * SRS AIRBAG” The airbags deflate very rapidly after DOINW004R09020 The front airbags are designed to inflate deployment, so there is little danger of only in moderate to severe frontal colli- obscured vision.
  • Page 36 Both offer no protection in rear ted, by an authorised PROTON impacts, rollovers, or minor dealer. DOIMW004R07008 frontal collision and minor side A – Seat belt with pre-tensioner impacts.
  • Page 37 SRS performance and lead to possible injury. The entire SRS system must be inspected by an authorised PROTON dealer after (3) If your vehicle has received any 10 years from the date of manufacture. side or front-end damage, you...

  • Page 38: Front Airbag

    (2) If the vehicle is written-off, we urge you to first take the vehicle to an 1 - Airbag caution label (driver's side) authorised PROTON dealer so that DOINW004R09003 the SRS system can be rendered 2 - Airbag caution label (passenger's safe.
  • Page 39 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. NOTE This is why it is critical to al- ways properly wear your seat- Immediately after the crash is detected, belt and maintain a proper the vehicle’s central door lock will seating/driving position. automatically unlock. (2) When the SRS airbag is de- The hazard warning lamps will light up.
  • Page 40 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. The front airbag may not deploy; 1. When the vehicles impacts a utility pole, tree or similar object 2. When the vehicle travels under the body of another vehicle such as a truck 3. When the vehicle is involved in an oblique/diagonal frontal impact NOTE The vehicle body's front area may...
  • Page 41 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. The air bag may deploy; Side airbag deployment conditions Side airbag * With certain types of side collisions, the 7. When the vehicle impacts on an elev- vehicle's body structure is designed to The side airbags are designed to deploy ated median/island, etc.
  • Page 42 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. The side airbag may not deploy; 1. When the your vehicle (A) suffers a side impact away from the passenger compartment with vehicle (B). 2. When a motorcycle or other similar small vehicles collide with the side of the vehicle.
  • Page 43 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. where it cannot typically provide protec- tion to the occupant. CAUTION The seat belts in your vehicle are your primary means of protection in a collision. The SRS airbags are designed to provide additional protection. Therefore, for your safety and the safety of all occupants, be sure to always properly wear your seat...
  • Page 44 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m.

  • Page 45: Instruments And Controls

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Instruments and controls Instrument Speedometer LCD Display Odometer/tripmeter Fuel gauge Tachometer Battery and transmitter voltage indicators Distance to empty (DTE) Average fuel consumption(AFC) Instantaneous fuel consumption (IFC) Indication and warning lamps Combination headlight, dipper and turn signal lever Rear window demister switch Hazard warning flasher switch Room lamps...

  • Page 46: Instrument

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Instrument LCD Display Right side OWN005INSCO11037 OWN005INSCO440 Left side DOINW005R11003 DOINW005R09017 1 - Tachometer 1– Gear shift indicator (A/T only) 2 - Speedometer DOINW005R09018 2– Battery voltage 3 - LCD display - left side LCD of all segments are displayed once 4 - Mode selection button 3–...

  • Page 47: Odometer/Tripmeter

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Press the set/reset button more Odometer/tripmeter NOTE than 1 second to activate left LCD OWN005INSCO441 • The default mode is indicators. Odometer (after To enable DTE, AFC, IFC display indicat- battery connection) ors; • If the battery is dis- connected, the ODO LCD display will show ODO (right...

  • Page 48: Fuel Gauge

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Fuel gauge takes a while before it registers the cor- The tachometer indicates the engine OWN005INSCO443 rect fuel level. speed in (rpm). Apart from giving warning of excessive engine speed, the tachometer could also be used as a WARNING guide to obtain more economical driving speeds.

  • Page 49: Battery And Transmitter Voltage Indicators

    Battery voltage repeatedly while ignition is ON position, make sure to check it voltage indicators When the engine is running (vehicle is at any authorised PROTON OWN005INSCO502 dealer. moving), battery will charge and keep increase the battery health. This situ- ation will keep the LO from visible.

  • Page 50: Average Fuel Consumption(Afc)

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. If the displayed DTE symbol goes below Average fuel The display value is updated every than 50 km or 30 miles the display value second. The value of the AFC can be consumption(AFC) will be replaced by a flashing display ' - read on the digital display when pressed - - - ' and flashing DTE icons and at this OWN005INSCO482...
  • Page 51 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. the last IFC reset. The current fuel used is an accumulated value of the injected fuel quantity. The procedure to display IFC is same as to display JT. Please refer Journey Time for more information. The IFC is calculated at every 1 second.

  • Page 52: Indication And Warning Lamps

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Indication and warning lamps OWN005INSCO11040 When the ignition switch is turned to ON” position, some indicators and warning lamps will appear as designated colour. When turned to OFF” position they will return to transparent black colour.
  • Page 53 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. 20 - Gear Shift Indicator (A/T only). P. 21 - Right LCD display. P. 44 NOTE To find information concerning the in- dication or warning lamps, refer to the specified page. For the other indication and warning lamps, refer to the sub- sequent pages.
  • Page 54 (with all door closed), there is a Fault Before moving your vehicle, check that Code inside the system. Contact your the warning lamp is OFF. nearest authorised PROTON dealer to check the symptom. Seatbelt warning lamp - red* If any intrusion of vehicle occurs during...
  • Page 55 START” position, there is a fault in the system. CAUTION Please refer to page 30 for more information, Suddenly applying the parking brake is and consult your authorised PROTON dealer dangerous because the wheels can lock. as soon as possible. Turn-signal indication lamps - green...
  • Page 56 During cold start, the lamp illuminates for a running, stop your vehicle when safe to do so few minutes until the engine reaches its warm and turn the engine off. Contact your nearest temperature state (60°C). authorised PROTON dealer for inspection. * if fitted...
  • Page 57 PROTON dealer for inspection. so and turn the engine off. Contact your This warning lamp does not indicate the nearest authorised PROTON dealer for inspec- amount of oil in the crankcase. This must tion. be determined by checking the oil level in the dipstick, while the engine is turned off.

  • Page 58: Combination Headlight, Dipper And Turn Signal Lever

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Combination headlight, Ignition key reminder beam is on, the high beam indication lamp in the instrument cluster will also If the driver's door is opened when the dipper and turn signal lever be illuminated. key is in the "LOCK"...
  • Page 59 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. NOTE lights located on the car will flash Turn/lane-change signals for 3 times from the moment the When the vehicle decelerate and stop, lever is tapped. while the front wiper switch is set at low speed, then the front wiper will change Windscreen wiper and washer to intermittent mode.

  • Page 60: Rear Windscreen Wiper

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. If more than 25 seconds, the default in- When the front wiper lever in OFF Rear Windscreen wiper termittent delay time will be set. position, press front washer switch, when the front washer switch is re- To default the programming mode, leased the front wiper motor will switch off the key.

  • Page 61: Precautions To Observe When Using Wipers And Washers

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. position (1), the washer fluid will be Before using the wipers in cold Misting functions sprayed on the rear glass and wiper will weather, check that the wiper function. blades are not frozen to the glass. The motor may burn out if the Rear wiper motor will remain activated wipers are used with the blades...

  • Page 62: Rear Window Demister Switch

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Rear window demister Hazard warning flasher CAUTION switch switch OWN005INSCO485 OWN005INSCO486 (1) The demister switch is not to melt snow but to clear mist. Remove snow before using the demister switch. (2) To avoid unnecessary discharge of the battery, do not use the rear window demister during starting of the engine or when...

  • Page 63: Room Lamps

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. the turn-signal indication lamps in the Rear (ON) The lamp illuminates. meter combination. NOTE When the switch is at door position; CAUTION • If a door is closed while the engine is If the lights are kept flashing for a running, the lamp fades-out immedi- long time, the battery will be dis- ately.
  • Page 64 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m.

  • Page 65: Starting And Driving

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Starting and driving Running-in recommendations Fuel usage Catalytic converter Economical driving Ignition switch Starting Drive by wire and driver safety Manual transmission Automatic transmission – 4A/T (Intelligent Vehicle Electronic Control System) Continuously Variable Transmission (CVT) Parking brake Braking Anti-lock brake system (A.B.S.)

  • Page 66: Running-In Recommendations

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Running-in Vehicles with automatic covered that you may reasonably expect full performance. recommendations transmission OWN006START11033 Do not speed when driving. The legal speed limit must be adhered Drive range Speed limit During the running-in period of the first to at all times.

  • Page 67: Catalytic Converter

    Catalytic converter ance, have your vehicle serviced by OWN006START390 authorised PROTON dealer promptly. Continued operation of your vehicle with a severe over- heated condition may result in pos- sible damage to the converters and vehicle.

  • Page 68: Economical Driving

    Starting of unburned petrol within the catalytic ised PROTON dealer as soon as Avoid rapid acceleration and sud- converter. possible. den starts; such operation will result 9 - ln unusual situations involving in higher fuel consumption.

  • Page 69: Ignition Switch

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Load can be inserted and removed only driving. The steering wheel will in this position. Do not drive with unnecessary art- be locked, causing loss of con- 2 - ACC icles in the luggage compartment. trol.

  • Page 70: Ignition Switch Illumination

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Starting Ignition switch illumination * How to lock and unlock the steering OWN006START078 wheel Tips for starting Do not operate the starter motor continuously for longer than 10 seconds; doing so could run down the battery.

  • Page 71: Drive By Wire And Driver Safety

    "N" (NEUTRAL) 2000 rev/min. Please drive your car to or the selector lever (automatic the nearest authorised PROTON work- transmission) in the "P" (PARK) or shops for immediate inspection. N” (NEUTRAL) position.

  • Page 72: Manual Transmission

    Do not rest your foot on the clutch thorised PROTON workshop. Drive range Speed limit pedal as this will cause premature clutch wear or damage. (2) For cars fitted with Automatic...

  • Page 73: Automatic Transmission - 4A/T

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. DRIVING DOWNHILL Selector lever operation running in period as specified by Use the brake pedal to reduce the speed the manufacturer. for driving downhill. This function assists engine braking efforts. The speed limit data indicated above is an approximate values and should be used for guidance only.
  • Page 74 If the lever is shifted into the P” or gear is in N” position. Therefore, R” position while the vehicle is Proton advise not to shift the gear moving, the transmission may to N” postion while the vehicle is damage.
  • Page 75 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. L - LOW erator pedal while the other foot is to according to the limit set by your resting on the brake pedal will affect This position is for driving up very steep local authority. braking efficiency and may cause hills and for engine braking at low premature wear of brake pads.

  • Page 76: Continuously Variable Transmission (Cvt)

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Unexpected acceleration may immediately after you start driving. Lock button need not be pressed occur if the selector lever is in To cause a downshift, depress the to shift the gear selector lever. a position other than "P" or brake pedal, manually shift down "N".
  • Page 77 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. prevent the selector lever from being R” REVERSE Shift lock mechanism moved from the P” (PARK) position. This drive mode allows the vehicle to be driven backwards. While in reverse, the SAT (Step auto) button reverse light will on automatically.
  • Page 78 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. is running, there is a problem in the Operation of the CVT • Always keep your right foot on transmission control unit (TCU). the brake pedal when shifting into or out of N” (NEUTRAL), to minim- ize the risk of loss of control.

  • Page 79: Parking Brake

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. If you are going to leave the vehicle Driving downhill This can damage the CVT. unattended, always switch off the en- gine and carry the key. Also, when you depress the acceler- When travelling down steep grades, the ator pedal while holding down the computer may automatically select a Parking brake...

  • Page 80: Braking

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. viced by an authorised PROTON dealer WARNING at regular intervals according to the service booklet. For vehicles equipped with ABS system, the brake force distribution Brake system on each tyre is electronically control to avoid skidding when hard brak- ing is applied.

  • Page 81: Anti-Lock Brake System (A.b.s.)

    The A.B.S. prevents the wheels from dents that maybe resulting sound, have the brake pads re- locking during braking, thus maintaining from excessive speed in turn, placed by your PROTON dealer. following another vehicle too directional stability, ensuring control is maintained, and providing optimum closely aquaplaning.
  • Page 82 (4) After driving on dusty, muddy vehicle checked by an authorised roads, remove any dust or mud PROTON dealer as soon as possible.

  • Page 83: Steering Wheel Height Adjustment

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. which may have become adhered the fully turned position for pro- WARNING to the wheel areas. When doing longed period whilst not driving. this, be careful not to damage the (1) After adjusting to the desired wheel speed sensors and cables This can cause damage to the power height, check to be sure that...

  • Page 84: Door Side View Mirrors With Remote-Control

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. ∧ - Up damage when parking in tight locations. Be sure to adjust the mirrors before It can be folded and unfolded manually. driving. > - Right 1 – To fold Door side view mirrors with <...

  • Page 85: Reverse Distance Sensor (R.d.s)

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. (2) If the mirrors become immovable (for Limitation 0.45-0.70 m example, because of frost), do not push the fold switch repeatedly in an attempt Approx. 4 beep/s to operate them; this can cause the mo- 0.70-0.95 m tor to burn out.
  • Page 86 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Even there are no obstacles behind the vehicle, the sensors may sound a warn- ing due to the following condition; 1. Water frozen on the sensors. 2. Sensors clogged with snow, dirt and mud. NOTE Keep the sensors clean and free from ice, to ensure they operate reliably.

  • Page 87: Auto-Speed (Cruise) Control

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Auto-speed (cruise) will also automatically switch off. If you wish to maintain a control * OWN006START11039 constant speed while driving, be sure the main switch has Auto-speed control allows you to main- been switched ON again. tain a set speed above 40 km/h without operating the accelerator pedal.
  • Page 88 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. ACC switch Brake pedal To reduce the set speed Pull up the "ACC/RES" switch and hold it until you reach the higher speed you want. Release the switch when the de- sired speed is reached. To increase your speed in small amounts, just pull up the "ACC/RES"...
  • Page 89 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. To deactivate To resume the set speed DOIIW006R07005 DOIIW006R07001 Pull the "CANCEL" switch towards you If the vehicle speed remains 40 km/h or or press OFF” at the main switch. higher, when the auto cruise speed control is deactivated by operating the The auto speed control can be deactiv- push "OFF"...
  • Page 90 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m.

  • Page 91: For Pleasant Driving

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. For pleasant driving Ventilators Air conditioning Ticket holder Power socket Vanity mirror Digital clock Accessories Cup holder Reverse camera...

  • Page 92: Ventilators

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Ventilators Air flow and direction adjustments OWN007PDRIV318 DOINW007R09009 Air always flows out from the ventilator when the fan is switched on. Adjust the DOINW007R09010 DOINW007R09015 direction of the air flow by moving the Front ventilators knob horizontally and vertically.

  • Page 93: Air Conditioning

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Main flow direction Air conditioning MODE SELEC- AIR OUTLETS TION (Face position) OWN007PDRIV320 Air flows to the up- per part of the pas- senger area. (Foot/face position) Air flows to the up- per part of the pas- senger area, and the front and rear leg A: From centre and side ventilators...
  • Page 94 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. the switch again, and the air condi- 6 - Operation of control - Rear fan tioning unit will stop. switch NOTE A mist may be seen coming from the outlets for a few moments dur- ing cooling.

  • Page 95: Ticket Holder

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. wise for more cooling. Select the desired Ticket holder * Power socket OWN007PDRIV326 OWN007PDRIV325 fan speed. If the outside is dusty or otherwise con- taminated, or if high cooling perform- ance is desired, set air selection switch to the recirculation position and turn the temperature control knob anticlock- wise completely.

  • Page 96: Vanity Mirror

    Digital clock OWN007PDRIV322 CAUTION Always put on the cover when not in use to prevent unnecessary object enter- For your safety, PROTON recom- ing into the socket. mends that do not adjust the clock while driving. WARNING Use of electrical accessories which exceed the specified rating might cause a fire.

  • Page 97: Accessories

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Accessories * OWN007PDRIV323 There are various accessories fitted in the car to be utilizing by user. Various small articles, cup and others can be kept in here. 1 - Tissue box * 2 - Utility compartment with closed door 3 - Storage box 4 - Coin holder...

  • Page 98: Glove Box

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. The utility compartment with closed Card slot, coin holder and storage Glove box door is located in front of front passen- ger's seat. To open, pull the handle as shown in the illustration. Tissue box compartment* DOINW007R09018 The glove box is located in front of front DOINW007R09008...
  • Page 99 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Multi-purpose hook (instrument Multi-purpose hook (at the front Luggage net hook * panel) passenger head rest) * DOINW007R09029 The luggage net hook is located in the DOINW007R09006 DOINW007R09028 luggage compartment. Folded grocery hook is located on the Grocery hook is located at the the front instrument panel at the front passenger passenger side as shown in the illustra-...

  • Page 100: Cup Holder

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. • Avoid loading unnecessary excess of lever (front cup holder) and at the rear Reverse camera * luggage to save fuel consumption. side of floor console(rear cup holder). OWN007PDRIV11023 CAUTION CAUTION Keep luggage as close as possible Do not drink beverages while driv- to the floor to prevent the luggage ing the vehicle;...

  • Page 101: Vehicle Care

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Vehicle care General Guideline Cleaning the inside of your vehicle Cleaning the outside of your vehicle...

  • Page 102: General Guideline

    These can all be dangerous, and contact an authorised PROTON dealer with an appropriate cleaner, and they all can damage your vehicle. for assistance in the selection of these cloth fabrics can be cleaned with materials.

  • Page 103: Cleaning The Outside Of Your Vehicle

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. NOTE Cleaning the outside of carefully clean the joints and flanges of the doors, hood, etc., where dirt is likely (1) If genuine leather is wet with water your vehicle OWN008VCARE036 to remain. or is washed in water, wipe off the water with a dry, soft cloth.
  • Page 104 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. possible with PROTON touch-up paint the door glass, hold the nozzle (2) Do not use petrol or paint to prevent corrosion. at a distance of more than 50 thinners to remove road tar or...

  • Page 105: Chrome Parts

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. als should be cleaned as soon as (3) Do not bring the plastic parts possible. into contact with brake fluids, (2) Brushes may damage the aluminum engine oils, greases, thinner for wheel surface. Be sure to use a painting, and sulfuric acid sponge, chamois leather, etc.

  • Page 106: Chassis And Underbody Protection

    You should electrical units. If possible, cover the take your vehicle to your authorized electrical components with water- PROTON dealer every 12 months to have proof material. body sheet metal inspected for condi- tion, and it is recommended to have the...

  • Page 107: For Emergencies

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. For emergencies If the vehicle breaks down Tools and jack Jacking up the vehicle Spare wheel If a tyre is punctured Engine overheating Towing Emergency starting Fuses Changing a fuse Replacement of lamp bulbs...

  • Page 108: If The Vehicle Breaks Down

    It is very important in tool set when receiving the car from ative and the pedal effort will in- case of emergency. your authorised PROTON dealer. crease. Press down the brake pedal harder than usual. To store...
  • Page 109 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. sion) to the "N" (NEUTRAL) position A - Jack-up point by a jack, use vehicle support or move the selector lever (auto- stands. mated manual transmission) to the CAUTION "P" (PARK) position. (6) The vehicle owner's manual (1) Don't set the jack at any other should be consulted prior to position than specified.

  • Page 110: Spare Wheel

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. bar to the shaft's jack end, as shown conditions (city driving, varying load CAUTION in the illustration. weight, etc.). Slowly rotate the wheel nut wrench Use only the jack included with the The spare wheel is stored beneath the until the tyre is slightly raised off the vehicle, and use it only for changing floor board of the luggage compart-...
  • Page 111 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Use the wheel nut wrench to re- Take out the spare wheel as shown move the bolt by turning it anti- in the illustration. clockwise. Spare wheel installation NOTE During loosening the bolt from the rod, do not fully released the bolt from the rod.

  • Page 112: If A Tyre Is Punctured

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. when it is raised on the jack, chock wheel nut wrench. Do not remove placed. Refer to Maintenance” the wheel (A) diagonally opposite to the wheel nuts yet. section on page 131. that being changed (B). 5.

  • Page 113: Engine Overheating

    If the fan is not turning, the nut. stop the engine immediately and 9. Lower and remove the jack and store contact an authorised PROTON the jack and flat tyre wheel. Have dealer for assistance.

  • Page 114: Towing

    Switch on the ignition leakage and the FEAD belt for looseness or damage. • Select neutral with brake pedal If there is anything wrong with the depressed. coolant system or FEAD belt, have the problem corrected at an author- ised PROTON dealer.

  • Page 115: Emergency Starting

    In the following cases, please con- below are never exceeded. during claim processing , ensure that tact a PROTON dealer. your vehicle is only towed by a trusted Towing speed: 50 km/h towing service. •...
  • Page 116 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. thawed out before connecting the CAUTION WARNING jumper cables, as it could otherwise explode. Turn off the ignition on both (1) Be sure to observe the connect- vehicles beforehand. Use care to ing sequence of (1), then (2), 1.

  • Page 117: Fuses

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. NOTE ular rotation of the engine might cause (3) Use adequate ventilation when the anti-lock brake system-warning lamp (1) Remove the cover before connect- charging or using the battery to light up. Refer to Starting and driv- ing the booster cable to the positive in an enclosed space.
  • Page 118 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. The satellite fuse housing cover shows details of the electrical systems and the fuse capacities. Engine compartment – Centralised Electric box (CE box) DOINW009R09041 In the engine compartment, the CE fuse housing is located at the position shown in the illustration.
  • Page 119 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Electrical system Capacity — — Internal lamp External lamp Head lamp LH Head lamp RH Front fog lamp Compressor ECU 1 Engine (ENG) Oxygen ECU 2 Fuel Pump Spare Spare Spare Spare — — DOINW009R09019...

  • Page 120: Changing A Fuse

    OWN009EMERG230 housing. If it is not blown, something else must be causing the problem; contact an authorised PROTON Before replacing a bulb, be sure the light dealer to have the problem checked. is off. Do not touch the glass part of the new bulb with your bare fingers;...
  • Page 121 Front turn-signal lamp of lamp bulbs for side turn signal lamp and rear combination lamp shall be car- Side turn signal lamp Max 2W ried out by an authorised PROTON dealer. Rear Outside Handling the lamp bulb DOINW009R09006 Room lamp...

  • Page 122: Replacing Headlamp

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Replacing Headlamp DOINW009R09063 DOINW009R09030 Remove the headlamp connector Unhook the spring (A) which secure by slightly pushing the both side of the bullb by slightly pushing the DOINW009R09058 connector inwards and pull out the spring inwards.
  • Page 123 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Replacing position lamp and front turn Replacing front fog lamp signal lamp DOINW009R09062 DOINW009R09036 Disconnect the position lamp con- Remove the fog lamp connector nector and front turn signal lamp harness (A). connector by turning it anticlock- wise.
  • Page 124 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Replacing license-plate lamps DOINW009R09038 DOINW009R09044 Pull out the bulb (C) from the sock- Pull out the lamp bulb (A) from the et holder (D). lamp assembly (B). DOINW009R09043 Push the new bulb into the socket Push the new bulb into the lamp Remove 2 pieces of tapping screw until its bottom.
  • Page 125 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Remove 2 pieces bolt (A) of high B - Centre room lamp Replacing room lamp mounted stop lamp. Insert a screwdriver into the notch of the lamp assembly Pry gently to remove the bulb from the lamp holder Push the new bulb into the lamp holder.
  • Page 126 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Push the new bulb into the lamp holder. Turn on the light to make sure the lamp is working properly. NOTE Wrap a piece of cloth around the tip of the screwdriver in order to avoid scratching the lens.

  • Page 127: Maintenance

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Maintenance General guide line Engine oil Automatic transmission fluid Engine coolant Battery Brake and clutch fluid Power steering fluid Washer fluid Wheel condition Tyre inflation pressure Tyre rotation Fuel, engine coolant, oil and exhaust gas leakage Exterior and interior lamp operation Meter, gauge and indication/warning lamp operation Steering wheel free play...

  • Page 128: General Guide Line

    Consult an author- had a chance to cool down. Remove the dipstick and wipe it with a ised PROTON dealer for neces- clean cloth. Reinsert the dipstick as far sary information. (2) If it is necessary to do work in as it goes.

  • Page 129: Selection Of Engine Oil

    COLD and using soft cloth during oil change operation of the automatic transmission. HOT on the dipstick or top-up. Either insufficient fluid or excessive fluid PROTON ATF- 9 or ATF SPIII” equivalent could cause transmission trouble. should be used for replenishment...

  • Page 130: Engine Coolant

    CAUTION this occurs, have the system checked at summer. The required concentration of an authorised PROTON dealer as soon anti-freeze differs depending on the Do not spill the fluid onto the ex- as possible.
  • Page 131 Please ensure the battery voltage is painted surfaces of the vehicle. checked whenever the vehicle is sent for (6) Keep it out of the reach of Spilled electrolyte should be servicing at authorised PROTON dealer. children. flushed immediately with ample amounts of water. Irrita-...

  • Page 132: Brake And Clutch Fluid

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. NOTE Brake and clutch fluid If the fluid level falls markedly in a short length of time, it indicates leaks from DO NOT ALLOW PETROLEUM-BASED OWN010MAINT267 the brake system. If this occurs, have the FLUID TO CONTACT, MIX WITH, OR vehicle checked at an authorised PRO- OTHERWISE CONTAMINATE THE FLUID.

  • Page 133: Washer Fluid

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Check the fluid level in the reservoir 2 - Check the quantity of water at the Wheel condition while the engine is idling. washer tank neck (funnel), (B). F OWN010MAINT010 refer to FULL water level. The level should be between the "MAX"...

  • Page 134: Tyre Inflation Pressure

    20000 km. infla- Tyre rotation OWN010MAINT268 Rear 210 kPa 250 kPa tion Take the vehicle to an authorised Proton pres- Spare 300 kPa dealer to have the wheels properly bal- sure anced. Fuel, engine coolant, oil and exhaust gas leakage...

  • Page 135: Exterior And Interior Lamp Operation

    PROTON dealer for assistance. If there is anything wrong, take the Exterior and interior lamp vehicle to an authorised PROTON dealer for inspection. operation OWN010MAINT014 Steering wheel free play Operate the light switch and combina-...

  • Page 136: Brake Pedal Free Play

    If the brake pedal free play is not within the standard range, have the brake Ventilation slots & Drum type – 6 ~ 8 notches pedal adjusted at an authorised PROTON weatherstripping dealer. If the parking brake lever stroke is not...
  • Page 137 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Weatherstripping To prevent freezing of the weatherstrip- ping on the door, hood, etc., they should be treated with silicone grease.
  • Page 138 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m.

  • Page 139: Specification

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Specification Chassis number Engine number Vehicle information code plate Dimensions Performance Weight Engine Transmission Electrical system Other specifications Lubrication...

  • Page 140: Chassis Number

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. DOINW011R09006 DOINW011R09005 Chassis number Location 2 (under 2nd row seat) OWN011SPECS590 The chassis number is engraved on the rear floor at 2nd row seat, right side. Location 1 (under the driver's seat) The chassis number can be seen once the second seat is tumble and the num- The chassis number is engraved on the ber can be seen direct on the floor car-...

  • Page 141: Vehicle Information Code Plate

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. NOTE Torchlight is recommended to be used. Vehicle information code plate OWN011SPECS592 DOIKW005R03028 A — VIN code B — Engine model code C — Trans Axle code D — Exterior code DOINW011R09004 The vehicle information code plate is E —...
  • Page 142 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. DOINW011R09001...

  • Page 143: Dimensions

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Dimensions Performance OWN011SPECS11066 OWN011SPECS11036 Items Dimension 1.6 M/T 1.6 A/T 1.6 CVT3 Item Front track 1542 mm L-LINE M-LINE M-LINE H-LINE Overall width 1809 mm Maximum speed (km/h) Front overhang 911 mm Minimum turning radi- 5.3 m Wheel base 2730 mm...

  • Page 144: Weight

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Weight Engine OWN011SPECS11033 OWN011SPECS11070 CamPro CPS CamPro CFE CamPro CPS CamPro CFE Item Item 1.6 M/T 1.6 A/T 1.6 CVT3 CVT3 L-LINE M-LINE M-LINE H-LINE Engine type CamPro CPS CamPro CFE Kerb weight (kg) 1401 1422 1433...

  • Page 145: Transmission

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Transmission Electrical system OWN011SPECS11035 OWN011SPECS11037 CamPro CPS Item 1600 cc Item M/T (F5M42) A/T (F4A4B) Voltage 3.583 2.842 Type 55D23L (Maintenance Free) Battery 1.947 1.529 Capacity (20HR) 60 Ah 1.379 1.000 Alternator output 12 V – 90 A Gear ratio 1.03 0.712...

  • Page 146: Other Specifications

    Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Other specifications OWN011SPECS11039 1.6 CamPro CPS 1.6 CamPro CFE Items CVT3 Fuel Electronic Multi-point injection (MPI) control Fuel Sys- Fuel Electric motor type pump Dry Single disc Clutch clutch with dia- torque converter phragm spring, Steering Size Rack and pinion type, hydraulic power steering...

  • Page 147: Lubrication

    5.0 litre WESTON 936 LLC includes 0.65 litre in the reserve tank Automatic transmission fluid 7.7 litre Proton ATF-9 SPIII CVT transmission fluid 3.8 to 4.0 litre ESSO EZL 799 (A) Petronas GL-4 SAE 80W or Hypoid gear oil API GL-4 SAE 75W- Manual transmission fluid 2.2 litre...
  • Page 148 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m.
  • Page 149 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. Index...
  • Page 150 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. ABS warning lamp Clutch, Pedal free play LCD display Accessory Coolant temperature indication lamp License plate lamp, Replacement Adjusment of the height Cup tray Lubrication AFC (Average Fuel Consumption) CVT warning lamp Luggage compartment lamp, Replacement Air conditioning Dimensions Manual transmission...
  • Page 151 Identifier: MANOWNFZ001FL Generated: 19.10.2011 10:32:24 a.m. - Steering wheel free play - Steering wheel height adjustment Supplementary restraint system (SRS) Tachometer Tools Tools and jack Towing Transmission - Automatic transmission - Manual transmission Transmitter, Battery Turn-signal indication lamps Tyre rotation upholstery Wheel condition Wiper blades...

Table of Contents