Table of Contents
Advertisement
Troubleshooting (continued)
Problem
It takes considerable
time for the image to
be displayed.
It takes considerable
time for the initial
screen to be
displayed.
The image is
distorted.
The remote control
does not work.
Printing
Problem
• Don't know how to
stop the printing
process when
printing from a
computer.
• Printing has
started after
starting the
computer.
• Cannot start
printing from the
computer.
• ERROR lamp on
the printer is lit
or blinking when
printing from the
computer.
96
• It may take some time until the image is displayed,
depending on the image format or size of the image.
This is not a malfunction.
• Do you have many images stored on the memory card?
⇒ It may take some time until the image is displayed.
This is not a malfunction.
• Is the printer located close to any devices that may be
emitting electric waves or magnetic waves?
⇒ Make sure the printer is not set close to any game
devices, stereo speakers or large format monitors,
etc.
• Are there any obstacles between the printer and the
remote control?
⇒ Remove any obstacles that may be in the way.
• Are you pointing the remote control at the remote control
receiver on the printer?
⇒ Make sure that you are aiming the remote control at
the printer's remote control receiver.
• Is the battery used up?
⇒ Replace the battery with new one.
PC
Printer
• Click [Cancel Printing] on the status monitor.
• Select [Start] → [Printers and Faxes] (or [Start] →
[Settings] → [Printers]) and then double-click the icon
for this printer. Then select [Printer] → [Cancel All
Documents] (or [Purge Print Documents]).
• Check the information displayed on the status monitor.
Cause and Remedy
Cause and Remedy
Page
—
—
10
15
15
14
Page
86
—
86
98
99
Advertisement
Table of Contents
