Table of Contents
Advertisement
Insert the paper cassette to the printer.
Slide the paper cassette lid
forward until it catches in
place.
1
Pull the paper stop
2
upwards.
Open the paper cassette
compartment cover and
insert the paper cassette
firmly while holding the
unit.
3
• Make sure that the positions of
the " " and " " do not shift when
attaching the paper cassette.
• If the positions of the " " and " "
are misaligned, paper may not feed
correctly.
Important
• Do not load more than 18 sheets of paper (or 20 sheets of wide size paper) in the paper
cassette.
• Be sure to remove printed paper before 10 or more sheets have piled up.
• Do not touch the print surface (the plain, glossy side) or allow it to get dirty. Clear prints may
become impossible if the print surface gets dirty, stained by fingerprints, or wet with water.
• Do not bend or fold the paper or load it in the cassette with the reverse side facing upward.
• Do not stretch the paper. This may lead to paper jam or prevent printing capability.
• Do not remove the perforated section before printing.
• Do not affix stamps or adhesive seals to the paper before printing.
• Do not print on the paper with a word processor before printing with this printer.
• Do not write on the paper before printing with this printer.
• Do not remove unused sheets of paper from the paper cassette. Close the cassette lid, then
insert the paper cassette into a plastic bag and store so that it lies flat.
Click
Slide the lid to align " "
and " " marks.
• If you do not slide the
lid far enough, it will not
attach properly to the
printer.
Firmly insert
as far as
Paper cassette
possible.
compartment cover
Pull the paper
stop upwards.
19
Advertisement
Table of Contents
