Security Menu; Boot Prompt Configuration - Panasonic Toughbook CF-31GT2AX2M Reference Manual

Setup Utility

Security Menu

Boot Prompt Configuration

Setup Utility Prompt
• When [Setup Utility Prompt] is set to [Disabled], the message "Press F2 for Setup / F12 for LAN"
is not displayed on [Panasonic] boot screen. However, F2 and F12 will work even if the message
is not displayed.
Boot Popup Menu
Password On Boot
Password On Resume
Boot Device on Hibernation Resume
Set Supervisor Password
Hard Disk Lock
• Can be changed only when [Set Supervisor Password] is set.
User Password Protection
Set User Password
• Can be changed only when [Set Supervisor Password] is set.
Embedded Security(TPM)
• Only for model that supports TPM
• For information on TPM, refer to the Installation Manual of "Trusted Platform Module (TPM)".
Click (Start), input "c:\util\drivers\tpm\readme.pdf" in [Search programs and files], and press
Enter.
Click [start] - [Run], enter "c:\util\drivers\tpm\readme.pdf", and click [OK].
Fingerprint Security
• Only for model with Fingerprint Reader
Intel(R) Anti-Theft Technology
95
Underlined items are the factory presets.
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled
Disabled
Enabled
Try prior devices
Hard Disk only
Enter the sub-menu.
Disabled
Enabled
No Protection
Protected
Enter the sub-menu.
Enter the sub-menu.
Enter the sub-menu.
Computer information
(Cannot be
changed.)