Technical Information
Network Connections and Communications Software
Close the communications software before using the power saving function.
If the power saving function (sleep
nection may be interrupted, or the performance may be adversely affected. In this case, restart the computer.
In a network environment, set [Never] for [Put the computer to sleep] and [Hibernate after] (
In a network environment, set the [System standby] and [System hibernates] settings to [Never].
Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes].
*1
Windows XP: standby
About Windows-related files
The Windows files included in the Windows DVD-ROM are contained in the following folders:
c:\windows\support\migwiz, c:\windows\support\tools, c:\windows\support\logging
c:\windows\docs, c:\windows\dotnetfx, c:\windows\i386, c:\windows\support, c:\windows\valueadd
Serial Devices
The COM ports of the computer are assigned as below.
COM1 : Serial Port A
COM2 : Serial Port B (Port replicator
*2
COM3 : GPS
*2
Optional
If you change the assignment, the serial devices may not work properly.
*1
or hibernation) is activated while communications software is used, the network con-
*2
*2
/Car mounter
)
108
page
14).