Panasonic Toughbook CF-31GT2AX2M Reference Manual page 18

Sleep or Hibernation Functions
To resume from sleep
1
Open the display, or slide the power switch (A).
In the default setting, the Windows password will be requested to resume.
When [Stand by] or [Hibernate] is selected as the setting for [When I close the
lid of my portable computer] (
the display.
CAUTION
Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately
30 seconds (normally) or 60 seconds (when the computer is on a network).
• Touch the keyboard (except for password input), touch pad, touchscreen (only for model with touchscreen), or power
switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Close or open the display.
• Shut down or restart Windows.
*3
• Enter sleep or hibernation (Wait approximately 1 minute).
• Operate the wireless switch.
• Insert and remove the SD Memory Card.
If the computer enters sleep while a USB keyboard or mouse is connected, touching the USB keyboard keys or mouse
will resume the computer.
*3
Windows XP: standby
*4
Windows XP: [When I close the lid of my portable computer:] / [When I press the power button on my computer:]
*5
If the speaker is muted or [Sound] is turned off in [Concealed Mode Configuration], beeps do not sound.
*3
or hibernation
page 15), you can resume operation opening
18