Panasonic Toughbook CF-31AAA7J1M Reference Manual page 84

Wireless LAN
4
Enter the profile name and wireless network name (SSID), and make other necessary
changes, then click [OK].
5
Select the profile you set and click [Activate].
6
Click .
NOTE
You need to set the profile for each user.
The settings depend on the network environment. For further information, ask the system administrator or the person
in charge of the network.
<For model with Intel
For further information of Intel
<For model with Atheros AR928X>
For further information of Atheros, click [Help] - [Atheros Client Utility Help] in the menu bar.
Enabling/Disabling the Wireless LAN Standard IEEE802.11a (802.11a)
1
Click on the notification area and click
2
Click [802.11a Enabled] or [802.11a Disabled].
A standard user needs to enter an administrator password.
NOTE
In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law.
The Wireless Switch Utility icon (
setting of IEEE802.11a.
If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the connec-
tion will be temporarily interrupted.
<Only for model with Intel
You can also change the IEEE802.11a setting in [Device Manager].
Click (Start) - [Computer] - [System properties] - [Device Manager].
A
A standard user needs to enter an administrator password.
Double-click [Network adapters] and double-click [Intel(R) Centrino(R) Advanced-N 6205].
B
® ®
Centrino Advanced-N 6205>
®
PROSet/Wireless Software, refer to [Help] in the menu bar.
or ) indicates the on/off status of wireless LAN and/or wireless WAN, not the
® ®
Centrino Advanced-N 6205>
or .
84